Volkswagen Golf / Golf GTI / Jetta. Manual — part 264
30-15
Removing
- Request code on vehicles with coded radio if
necessary.
- Disconnect battery with ignition switched off.
Repair Manual, Fuel Injection & Ignition, Repair
Group 24; Removing and installing air cleaner
- Remove intake hose -1-, connector -2- and hose
-3- from Mass Air Flow Sensor.
- Remove complete air cleaner housing, to do
this, unscrew bolts -4- and -5-
- Disconnect supply hose -A- to brake fluid
reservoir and seal it.
Repair Manual, Body Interior, Repair Group 70;
Removing and installing instrument panel
- Remove clip -B-, which secures line/hose to
clutch master cylinder.
- Separate line/hose assembly -C- from master
cylinder and seal it.
- Remove covers/lower driver's side.
Clutch mechanism, repairing
30-16
- Turn clutch pedal switch 45 to left and pull
out from support.
- Separate master cylinder operating rod from
clutch pedal as follows:
- Pull clutch pedal lightly toward passenger
compartment.
- Press both sides of mounting inward using
pliers T10005 (arrows).
Clutch mechanism, repairing
30-17
- Remove entire clutch pedal
support as follows:
- Remove connecting plate -A-
first (arrows -1-).
- Remove securing nuts (arrows -
2-) for support -B-.
- Take off mounting bracket.
- Turn stop -A- of clutch pedal in
direction of arrow and remove.
Clutch mechanism, repairing
30-18
It must not be covered in upper area
by over center spring mounting
(arrow -2-).
- Push master cylinder first in
direction of arrow -1- onto stop.
- Swing it in direction of arrow -3-
out of mounting bracket.
Clutch mechanism, repairing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст