Volkswagen Golf / Golf GTI / Jetta. Manual — part 406
45-16
- Bleed brake system
Page 47-33
- Enter radio code.
- Code control module.
Repair Manual, Brake System On Board
Diagnostic (OBD), Repair Group 01
Tightening Torques:
Control module to hydraulic unit
max.
4 Nm (35 in.
lb)
Hydraulic unit to bracket
8 Nm (70 in.
lb)
Nut for brake master cyliner to
brake booster
20 Nm (15 ft.
lb)
Brake lines at ABS unit:
Thread M10 x 1
14 Nm (10 ft.
lb)
Thread M12 x 1
14 Nm (10 ft.
lb)
Nut to body
20 Nm (15 ft.
lb)
Cap nut to body
20 Nm (15 ft.
lb)
Hydraulic unit, brake booster/master cylinder, overview
45-17
ABS system
components
for front
axle,
removing
and
installing
Note:
Removing and
installing ABS
system components
is identical for FS III
and FN 3 brake
calipers.
1 - ABS wheel
speed
sensor
Before
inserting
sensor,
clean
mounting
hole inner
surface
and coat
with
lubricant, G
000 650
2 - Wheel
bearing
housing
3 - Hex socket
head bolt, 8
Nm (70 in.
lb)
ABS system components for front axle, removing and installing
45-18
Repair
Manual,
Suspension,
Wheels,
Steering,
Repair Group
40
Repair
Manual,
Suspension,
Wheels,
Steering,
Repair Group
40
4 - Splash
shield
5 - Hex
bolt, 7
Nm (62
in. lb)
6 - Wheel
bearing
Replace
each
time
after
removing
Removing
and
installing
7 - Screw
8 - Brake
disc
9 - Wheel
hub
with
ABS
wheel
speed
sensor
rotor
Pressing
out and
in
ABS system components for front axle, removing and installing
10 - Circlip
ABS system components for front axle, removing and installing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст