Volkswagen Golf / Golf GTI / Jetta. Manual — part 355
01-104
Test requirements
Switch ignition and electrical
consumers off before beginning
the check (headlights, lighting,
fan ...).
Fuses S9, S13, S178 and S179
must be OK (remove fuses from
fuse holder to check).
Removing air cleaner
- Pull connector -2- off mass air
flow sensor.
- Release spring-type clip -1- on air
duct hose with pliers V.A.G 1921
and pull hose off air cleaner.
- Remove air cleaner bolts -3- and
take out air cleaner -4-.
ABS, ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE, electrical check
01-105
- Release ABS control module
(w/EDL) -J104- connector -arrow
1- and pull off -arrow 2-.
The specified values are matched to
the V.A.G 1526 and are not
necessarily applicable for other test
units.
- Connect test box V.A.G 1598/21 -
1- to multi-pin connector of ABS
control module (w/EDL) -J104- (-
2-).
ABS, ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE, electrical check
01-106
Multi-pin connector with
contact assignment
Note:
All contacts not listed are currently
not assigned and must never be
connected to other components!
Contact assignment of
connectors for voltage supply and
On Board Diagnostic (OBD) with
V.A.G 1551 Scan Tool
Contact
4
= Ground (terminal 31)
Contact
16
= Positive (terminal 30)
to S12
Contact
7
= K wire to contact 7 of
multi-pin connector
T25 of ABS control
module (w/EDL) -
J104-
Contact assignment of connector
T25 wiring harness/ABS control
module (w/EDL) -J104-
ABS, ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE, electrical check
01-107
Contact
Wiring connection to component ...
1
Left front ABS wheel speed sensor -G47-
2
Left front ABS wheel speed sensor -G47-
3
Coding bridge to contact 14
4
Voltage supply to ignition switch
5
Left rear ABS wheel speed sensor -G46-
6
Left rear ABS wheel speed sensor -G46-
7
Connector T16/7, K wire
8
Ground point left in engine compartment and Ground connection in
engine compartment wiring harness
9
Voltage supply from battery +
10
Data bus wire
Wiring diagrams
11
Data bus wire
Wiring diagrams
12
Vehicles with navigation system only
ABS, ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE, electrical check
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст