Volkswagen Golf / Golf GTI / Jetta. Manual — part 662
9. Operating rod
¡
Press actuator lever with operating
rod
Item - 13 -
against stop and
engage operating rod free of
tension
10. Bolt
¡
22 Nm
11. Lock
¡
Removing
¡
Unclip operating rod
Item - 9 -
,
remove bolt
Item - 10 -
(2 pieces)
and remove lock.
12. Rear lid
13. Actuator lever with linkage clip
Item - 9 -
from motor for
rear lid release.
- Removehex nuts
Item -
7 -
and remove carrier plate
Item - 5 -
.
- Remove motor for rear lid
release
Item - 8 -
from
carrier plate.
- Remove lid trim
Repair Manual, Body Interior, Repair
Group 70, Rear lid trim
- Disconnect connector
from lock.
Lock cylinder housing, removing and
installing
Rear lid, (Jetta Wagon)
13/2/2005
1. VW-symbol
¡
consisting of emblem carrier and
message
¡
To install VW symbol, remove
protective foil and adhere to lock
cylinder housing using two-sided
adhesive tape
¡
also bolted to lock cylinder housing
Item - 7 -
2. Lock cylinder housing
¡
Removing
- Remove rear lid trim
Rear lid, (Jetta Wagon)
13/2/2005
¡
Installing:
3. Micro-switch
¡
for vehicles with central locking
system
¡
for vehicles without central locking
system
¡
Allocation
Original parts
distributor
¡
Removing and installing
55-4,
Micro-switch, removing and
installing
4. Linkage clip
¡
To remove operating rod,
disconnect linkage clip and pull
open
5. Seal
¡
Applied in area of lock cylinder
housing
6. Bolt
¡
Qty. 3
Repair Manual, Body Interior, Repair
Group 70, Rear lid trim
- Disconnect connector for
micro-switch / wiring
harness.
- Remove operating rod at
actuator lever
- Remove screws
Item -
6 -
(3x).
- Remove lock cylinder
housing with VW symbol
from rear lid.
Installation is performed in
reverse order of removal.
Rear lid, (Jetta Wagon)
13/2/2005
¡
4 Nm
7. Bolt
¡
Qty. 2
¡
0.3 Nm
Micro-switch, removing and installing
Removing
- Removing and installing lock cylinder housing - 2 -
55-
4, Lock cylinder housing, removing and installing
.
- Release catches - arrow - at micro-switch - 1 - .
To do so, press catches downward.
- Disengage catches - arrows - of micro-switch - 1 - from
lock cylinder housing - 2 - .
- Remove micro-switch - 1 - from lock cylinder - 2 - .
Installing
Rear lid, (Jetta Wagon)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст