Volkswagen Golf / Golf GTI / Jetta. Manual — part 514
Right suspension strut
Additional work is required if right suspension strut is to be
removed
- Remove noise insulation.
- Disconnect drive axle from transmission axle flange.
The following work sequence is valid for both sides
- Separate wheel bearing housing/suspension strut bolted
connection.
- Insert Spreader 3424 into slot - arrow - .
- Turn ratchet handle through 90 and pull off 3424 .
- Press brake disc in direction of suspension strut by hand.
Otherwise the shock absorber tube could catch in the wheel
bearing housing hole.
- Pull wheel bearing housing off shock absorber downward.
Front suspension R32, servicing
Remove hex nut for upper shock absorber mount
1 - Ratchet (commercially available)
2 - T10001/8
3 - T10001/11
4 - T10001/5
- Remove strut.
Installing
- Install suspension strut.
- Remove spreader 3424 .
- Tighten bolted union wheel bearing housing/suspension
strut.
Further installation of suspension strut is performed in
reverse order
Tightening torques:
12-point nut for upper spring plate
60 Nm
Hex. nut for wheel bearing housing
60 Nm plus an additional
1
/
4
turn 90
Coupling rod to suspension strut. Use new nuts!
90 Nm
Front suspension strut, servicing
Front suspension R32, servicing
Special tools, testers and auxiliary items
required
n
Torque wrench V.A.G1332
n
Spring compressor V.A.G1752/1
n
Spring holder V.A.G1752/4
n
Shock absorber set T10001
- Removing suspension strut
40-4, Suspension strut,
removing and installing
.
Removing coil spring
Front suspension R32, servicing
- Compress coil spring with spring compressor V.A.G1752/1
until the upper spring plate is free.
- Remove hex nut from piston rod.
- Remove individual components of the suspension strut
and coil spring using spring compressor V.A.G1752/1 .
1 - Ratchet (commercially available)
2 - T10001/8
3 - T10001/11
4 - T10001/5
5 - Spring tensioner V.A.G1752/1
6 - Bracket V.A.G1752/4
Caution!
First pre-load the spring until the upper spring plate is
no longer under load.
Front suspension R32, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст