Volkswagen Golf / Golf GTI / Jetta. Manual — part 899

01-372

Adaptation - function 10

Matching ignition keys to radio wave remote

control

Note:

If new or additional ignition keys are required

they must be matched to the immobilizer and
convenience system control electronics.

The matching procedure must always be

carried out for all the ignition keys, including the
existing ones.

The number of keys already matched will be

displayed when the adaptation (matching)
function is selected.

With the introduction of this generation of

convenience system it is possible to program
additional functions. The functions and the
programming are described

Page 01-292

.

The matching can be interrupted with the "C"

button of the V.A.G 1551.

CAUTION!

The V.A.G 1551 dealership number (workshop
code) will be stored in immobilizer control
module when matching ignition keys.

Central locking system (vehicles without power windows), On Board Diagnostic ...

13/2/2005

01-373

Prerequisites

All ignition keys available. If no old ignition key

is available see "Lost key procedure",

Repair Manual, Electrical Equipment On

Board Diagnostic (OBD),Repair Group 01;
Matching ignition keys

Key fob with covered secret number is

available, if not see "Establishing secret
number",

Repair Manual, Electrical Equipment On

Board Diagnostic (OBD),Repair Group 01;
Matching ignition keys

- Insert correct profile ignition key in the ignition

lock.

- Connecting scan tool

Page 01-3

, initiating On

Board Diagnostic (OBD)

Page 01-96

.

The adaptation shown here is only an example.

Rapid data transfer

HELP

Select function XX

Indicated on display:

- Press buttons -1- and -0- (10 selects function

"Adaptation").

Rapid data transfer

Q

10 - Adaptation

Indicated on display:

- Confirm entry with the -Q- button.

Adaptation

Enter channel number XX

Indicated on display:

- Press buttons -0- and -0- (all keys are erased

with channel number 00).

Central locking system (vehicles without power windows), On Board Diagnostic ...

13/2/2005

01-374

- Confirm entry with the -Q- button.

Note:

It is not possible to match a new or
additional key(s) without erasing
existing learned/matched key(s).

Adaptation

Q

Erase learned values

Indicated on display:

- Confirm entry with the -Q- button.

Adaptation

Learned values are erased

Indicated on display:

- Press

button.

Rapid data transfer

HELP

Select function XX

Indicated on display:

- Press buttons -1- and -0- (10

selects function "Adaptation").

Rapid data transfer

Q

10 - Adaptation

Indicated on display:

- Confirm entry with the -Q- button.

Adaptation

Enter channel number XX

Indicated on display:

- Press buttons -0- and -1- (all keys

are "learned" with channel
number 01).

Adaptation

Q

Enter channel number 01

Indicated on display:

- Confirm entry with the -Q- button.

Central locking system (vehicles without power windows), On Board Diagnostic ...

13/2/2005

01-375

Channel 1. . .Adaptation 1

Key

1 <-1 3->

Indicated on display:

The top line displays number of keys
to be "learned" (standard =1). Select
number of keys with buttons 1 and
3.

- Press

button.

Channel 1. . .Adaptation 1

Enter matching value XXXXX

Indicated on display:

- Press the -0- button four times

and then enter the number of all
ignition keys to be matched,
including the existing key, (e.g.
00003); max. possible Qty. 4.

- Press

button.

Channel 1 Adaptation 3

Q

Key 3 <-1 3->

Indicated on display: Number of

radio wave key to be "learned".

- Confirm entry with the -Q- button.

Channel 1 Adaptation 3

Q

Store amended value?

Indicated on display:

- Confirm entry with the -Q- button.

Channel 1 Adaptation 1

Amended value is stored

Indicated on display:

- Press

button.

Rapid data transfer

HELP

Select function XX

Indicated on display:

Central locking system (vehicles without power windows), On Board Diagnostic ...

13/2/2005