Volkswagen Golf / Golf GTI / Jetta. Manual — part 900
01-376
- A button must be pressed once on each of the
radio wave keys to be "learned" (in example
above, 3 keys).
- Switch off ignition and remove ignition key.
- Perform functional check (e.g. 3) of radio wave
keys.
Note:
All 3 keys (see example) can be "learned" in
one matching sequence.
15 seconds must not be exceeded when
matching all ignition keys (pressing a button).
A successful adaptation can be determined via
Read Measuring Value Block, function 08,
display group number 013,
Page 01-277
.
When operation the radio wave unit both of first
measurement values must have the status OK.
Simultaneously the last measurement value will
show the positional number of the key (i.e. first,
second, third, fourth key).
If the remote control button is operated several
times the third display -no measured value-
changes to "OK".
Central locking system (vehicles without power windows), On Board Diagnostic ...
13/2/2005
01-377
The matching of ignition keys is automatically
terminated when:
Number of keys to be matched is reached.
A button of one of the keys to be "learned" is
pressed frequently.
Permissible matching period of 15 seconds is
exceeded (malfunction is stored).
- Select function 02 "Check DTC memory". If
there is no malfunction stored, the matching of
the keys has been successfully completed.
- Press buttons -0- and -6- to end the output.
Rapid data transfer
Q
06 End output
Indicated on display:
- Confirm entry with the -Q- button.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Switch off ignition.
- Disconnect connector to V.A.G 1551 scan tool.
Central locking system (vehicles without power windows), On Board Diagnostic ...
13/2/2005
01-378
The various functions listed in the table can be called up and adapted by selecting the
channel numbers 03 to 10.
Radio wave remote control functional variants
Channel
number
Significance
Measured
value
03
Auto lock/unlock: Vehicles will be locked when a speed of
15 km/h is reached
on=1
off= 0
04
Auto lock/unlock: Vehicles will be unlocked when the
ignition key is withdrawn from the ignition lock
on=1
off= 0
05
IM switch-off: Interior monitoring is activated or
deactivated by operating central locking closed twice
on=1
off= 0
06
Horn sounds when unlocking: Confirmation signal when
unlocking
1)
on=1
off= 0
07
Horn sounds when locking: Confirmation signal when
locking
1)
on=1
off= 0
08
Turn signals flash when unlocking: Unlocking is
confirmed by turn signals flashing twice
on=1
off= 0
09
Horn sounds when locking: Locking is confirmed by turn
signals flashing once
on=1
off= 0
10
Setting for alarm horn: Programming the horn operation
when the alarm is triggered appropriate to the legislation
of the countries
1= Rest of
Europe
2= Germany
3= Great
Britain
1)
No longer allowed according to German legislation.
Central locking system (vehicles without power windows), On Board Diagnostic ...
13/2/2005
01-379
The matching shown here is only an
example.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -1- and -0- (10
selects function "Adaptation").
Rapid data transfer
Q
10 - Adaptation
Indicated on display:
- Confirm entry with the -Q- button.
Adaptation
Enter channel number XX
Indicated on display:
- Press buttons -0- and -8-
(channel number 08 switches the
turn signals on or off when
unlocking).
Channel 8 Adaptation 1
Unlock Flashing on <-1 3->
Indicated on display:
- Press
button.
Channel 8. . .Adaptation 1
Enter adaptation value XXXXX
Indicated on display:
- Press
button.
- Press button -0- five times (e.g.
00000).
Channel 8. . .Adaptation 0
Q
Enter adaptation value 00000
Indicated on display:
- Confirm entry with the -Q- button.
Central locking system (vehicles without power windows), On Board Diagnostic ...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст