Volkswagen Golf / Golf GTI / Jetta. Manual — part 722
lock carrier and remove radiator grille
upward.
Installing
- Align radiator grille according to center
locating point
Item - 5 -
, insert lower
pins
Item - 4 -
into bumper cover and
clip in upper area.
Trim
13/2/2005
66 - 6
Protective side moldings
Protective side moldings, replacing
- Heat side protective molding using hot air gun before
removing.
- Clean outer panel with mineral spirits, treat with silicone
remover and rub dry.
- Remove protective foil, attach side protective molding and
press on forcefully. Processing temperature approx. 68 F
(20 C).
1. Front door protective molding
¡
Left and right protective molding
have a different hole pattern
¡
Self adhering
Protective side moldings
13/2/2005
¡
Material PP/EPDM
¡
Centering pins
Item - 3 -
and
Item - 4 -
specify location of
protective moldings.
2. Pins
¡
Stop twisting of molding
3. Centering pins
4. Centering pins
5. Pins
¡
Stop twisting of molding
6. Rear door protective molding
¡
Left and right protective molding
have a different hole pattern
¡
Self adhering
¡
Material PP/EPDM
¡
Centering pins
Item - 3 -
and
Item - 4 -
specify location of
protective moldings.
7. Protective foil
Protective side moldings
13/2/2005
66 - 7
Rear spoiler with integrated stoplight
Tools
Special tools, testers and auxiliary items required
Wiring harness repair kit VAS 1978
Cutting tool V.A.G1351
Rear spoiler with integrated stoplight
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст