Volkswagen Golf / Golf GTI / Jetta. Manual — part 721
¡
First insert cap into round clip and
then press into double clip
5. Base plate
6. Cover cap
¡
Center
¡
Press cap onto roof railing base
7. Angle bracket
¡
Installing
66-4, Angle bracket,
installing
¡
with securing pins, taper washer,
sealing ring and securing cap
(securing cap is component of
replacement part kit)
8. Bolt
¡
Qty. 12
¡
20 Nm
9. Weld nut
Angle bracket, installing
- Guide angle bracket - 1 - into roof hole and press into roof
hole until securing cap - 2 - engages. All catches must
engage.
Note:
Securing cap must not be turned on angle bracket before it
Roof rail
13/2/2005
locks in.
- Press angle bracket - 1 - on inner side panel, secure with
bolts - 3 - (20 Nm).
Note:
At center angle bracket, bolt points are situated next to one
another.
- Unscrew securing cap - 2 - from outside, use a tool if
necessary.
Roof rail
13/2/2005
66 - 5
Trim
Radiator grill, removing and installing
Assembly overview
1. Radiator grille
¡
Golf
¡
Material-ASA
2. Catches
3. Cross pins
4. Retaining pins
5. Center locating point
Trim
13/2/2005
6. VW emblem
¡
Clipped in to radiator grille
7. Radiator grille
¡
Jetta
¡
Material-ASA
Removing
- Disconnect release lever from hood lock
63-1, Release lever, removing
.
- Release retaining clips
Item - 2 -
using a screwdriver.
- Remove cross pins
Item - 3 -
from
Trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст