Volkswagen Golf / Golf GTI / Jetta. Manual — part 1057
01-136
Data Bus On Board
Diagnostic Interface -J533-
("Gateway") m.y. 2000
through m.y. 2001, On
Board Diagnostic (OBD)
General information
Instrument clusters from m.y. 2000 are
integrated into the "Powertrain" CAN Data
Bus network (may also be know as "CAN-
Bus" or "Data-Bus").
The Data Bus On Board Diagnostic (OBD)
interface -J533- (which is integrated into the
instrument cluster) enables data to be
exchanged between the various CAN-Bus
networks and the Data Link Connector
(DLC) "K-wire".
The Data Bus On Board Diagnostic (OBD)
interface -J533- has specific On Board
Diagnostic (OBD) capabilities via address
word 19 "Gateway", and must always be
coded separately from the instrument cluster
Page 01-149
.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m.y.
13/2/2005
01-137
Data Bus On Board Diagnostic Interface,
On Board Diagnostic (OBD), initiating
&checking control module versions
Test requirements:
All fuses OK according to wiring diagram
Voltage supply OK (at least 11.5 V).
Scan Tool VAG 1551 or VAG 1552
connected.
Notes:
Connecting Scan Tool
Page 01-1
.
The following description applies only to Scan
Tool VAG 1551.
- Switch on ignition.
- Switch on printer with the PRINT button
(indicator lamp in button lights up).
- Press button -1- to select operating mode 1
"Rapid data transfer".
Rapid data transfer
HELP
Input address word XX
Indicated on display:
- Press buttons -1- and -9- to input "Gateway"
address word 19.
Rapid data transfer
Q
19 - Diagnostic Interface for Data Bus
Indicated on display:
- Press -Q- button to confirm input.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m.y.
13/2/2005
01-138
Rapid data transfer
Q
Tester sends address word 19
Indicated on display:
6N0909901 Gateway K <->
CAN 0001
Coding 00007
WSC 00000
Indicated on display (example only):
1)
The Data Bus On Board
Diagnostic Inteface -J533- in
instrument cluster is referred to in
the OBD program as "Gateway".
2)
Dependant on the control modules
connected to the CAN Bus network.
Top line:
Part No. of control
module
System designation
(Gateway K <-> CAN)
1)
Software level
Bottom
line:
Coding
2)
Workshop number
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- After the HELP button is pressed,
a list of the possible functions is
printed out.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m.y.
13/2/2005
01-139
List of available functions
Function
page
01 -
Check Control Module
Versions
Page 01-
137
02 -
Check DTC memory
Page 01-
140
05 -
Erase DTC memory
Page 01-
146
06 -
End Output
Page 01-
148
07 -
Code Control Module
Page 01-
149
08 -
Read Measuring Value
Block
Page 01-
151
Notes:
Press HELP button to print out a complete list
of available functions. This list indicates
function capability of VAG 1551 Scan Tool (ST)
only, and does not necessarily reflect function
capability of vehicle systems equipped with
OBD. For "Gateway" address word 19, do not
attempt to select functions other than those
listed above.
After function is completed and forwarded with
button, VAG 1551 Scan Tool (ST) returns to
following start position:
Rapid data transfer
HELP
Select function XX
Indicated on display:
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m.y.
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст