Volkswagen Golf / Golf GTI / Jetta. Manual — part 792
1. Right seat trim
2. Belt latch
3. Seat
4. Backrest
5. Adjusting knob (lumbar support)
6. Left seat trim
7. Adjusting knob (backrest)
8. Adjusting lever (seat height)
9. Bolts
10. Caps
11. Bolt for left trim
Front seats
13/2/2005
Front backrest, removing and installing
Removing
- Remove seat
72-1, Front seats, removing and
installing
.
- Remove belt latch - 1 - .
- Remove adjusting knob - 7 - .
- Unclip two cover caps - 10 - , unscrew
two bolts - 9 - and remove adjusting lever
- 8 - .
- Remove trim - 1 - .
- Remove bolt - 11 - .
Front seats
13/2/2005
- Remove trim - 6 - .
- Disconnect harness connector - 1 - for backrest heater,
and if necessary, remove wiring harness for backrest heater
by removing seat height adjusting element from seat frame
72-1, Seat height adjuster, removing and installing
.
Front seats
13/2/2005
- Remove bolts - 1 - on both sides of seat and remove
backrest.
Note:
n
In 2-door vehicles, backrest is secured to seat pan
with only two bolts (24 Nm).
Installing
Installation is reverse of removal.
Note:
n
Bolts - 1 - must be secured with fluid locking
compound D 000 600 A2 (tightening torque 20 Nm).
Lumbar support, removing and installing
Note:
n
lumbar support allows backrest adjustment in area of
lumbar vertebra.
Removing
- Remove headrest guides
72-1, Headrest guides,
removing and installing
.
- Remove seat
72-1, Front seats, removing and
installing
.
- Remove backrest
72-1, Front backrest, removing and
installing
.
- Unclip trim on rear side at bottom and
unhook upward.
Front seats
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст