Volkswagen Golf / Golf GTI / Jetta. Manual — part 1076
27-47
- Remove bolt -1- on positive ( B+ )
terminal clamp.
- Unclip and lift/remove fuse holder
mounting -2-.
- Slide fuse box out from mounting
in direction of -arrow-.
- Lift fuse box away from battery
and secure to front hood support
with elastic cord as illustrated.
- Release battery positive (B+)
terminal clamp fastener -arrow-
and remove terminal from battery
post.
Battery, disconnecting and reconnecting
13/2/2005
27-48
- if necessary, remove screws -
arrows- and remove cover -1-.
Battery, disconnecting and reconnecting
13/2/2005
27-49
Battery, reconnecting
Special tools and auxiliary items
needed
Notes:
VAG 1331 Torque wrench (or
equivalent 5 - 50 Nm )
In order to prevent damage to
the battery housing, battery
terminals must be placed on
battery posts without using force
(by hand only).
Battery posts and terminals must
no longer be greased.
- Refit battery positive ( B+ )
terminal on battery positive post.
- Torque positive ( B+ ) terminal
clamp fastener to 6 Nm.
- Release elastic cord from fuse
holder and slide into mounting.
- Clip fuse holder mountings into
battery box -1 and -2-.
- Only after the fuse holder and
positive ( B+ )terminal have been
secured should the negative ( - )
terminal clamp be installed.
- Torque negative ( - ) terminal
clamp fastener to 6 Nm.
Battery, disconnecting and reconnecting
13/2/2005
27-50
- If necessary, reinstall cover -1-
with screws -arrows-.
- Reinstall and secure battery
cover.
- Clip positive cable into retainer.
- Perform work steps specified in
table
Page 27-51
.
Battery, disconnecting and reconnecting
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст