Volkswagen Golf / Golf GTI / Jetta. Manual — part 1170
01-72
Rapid data transfer
HELP
Select function XX
Indicated on display:
Notes:
Warning!
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Rapid data transfer
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Adhere exactly to test sequence:
First check DTC memory, if
necessary repair malfunctions,
then erase.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-73
End Output (function 06)
- Press buttons -0- and -6- to select function "End
output".
Rapid data transfer
Q
06 End output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Enter address word XX
Indicated on display:
- Switch off ignition.
- Disconnect VAG 1551 Scan Tool (ST).
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-74
Code Control Module (function 07)
Use this function to code the Multi-function
Steering Wheel (MSW) electronics.
Coding
- Connect VAG 1551 Scan Tool (ST), input
address word 16 "Steering wheel electronics"
1J0907487 Steering wheel electron.x28
Coding 00008
WSC 00000
Indicated on display (example only):
Note:
Control module coding depends on the part number
of the control module installed. Make note of the
control module part number when displayed by the
Scan Tool.
- Press
button
Rapid data transfer
HELP
Select function XX
Indicated on display (select function):
- Press buttons -0- and -7- to select "Code control
module" function 07".
- Press -Q- button to confirm input.
Coding control module
Enter code number XXXXX
(0-32000)
- Indicated on display:
- Refer to control module part number noted
earlier, and check/enter applicable code number
from code tables
Page 01-75
.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-75
Code tables
Control modules without index, and with
index B
Example: 1J0 907 XXX _ or 1J0 907 XXX B
Code
number
Designation
00008
Radio & cruise control system
(CCS)
Control modules with index A
Example: 1J0 907 XXX A
Code
number
Designation
00118
Radio & cruise control system
(CCS)
Coding control module
Q
Enter code number 00118
(0-32000)
- Indicated on display (example only):
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Select function XX
Indicated on display (select function):
Check DTC memory after coding
Page 01-62
,
and erase any DTCs stored.
- End output (function 06)
Page 01-73
.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст