Volkswagen Golf / Golf GTI / Jetta. Manual — part 1169
01-68
Output Diagnostic Test Mode (DTM)
(function 03)
The Output Diagnostic Test Mode (DTM) is part
of the electrical check.
The DTC memory must be checked after the
Output Diagnostic Test Mode (DTM).
Output Diagnostic Test Mode (DTM),
initiating
Notes:
Output Diagnostic Test Mode cannot be
initiated, or will be interrupted if engine is
running or vehicle is moving,
Use the -C- button to exit the test sequence at
any time.
- Connect VAG 1551 Scan Tool (ST), input
address word 56 "Radio" and then press
button, until "Select function XX" is shown in
display.
Rapid data transfer
HELP
Select function XX
Indicated on display (select function):
- Press buttons -0- and -3- to select "Output
Diagnostic Test Mode" function 03.
Rapid data transfer
Q
03 - Output Diagnostic Test Mode
Indicated on display
- Press -Q- button to confirm input.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-69
Output Diagnostic Test Mode
Segment test
Indicated on display:
"AAAABBBBCCCCDDDD" will
appear in the instrument cluster
display.
- Switch on radio system, tune in
radio program and set to middle
volume.
- Press
button.
Output Diagnostic Test Mode
Radio louder
Indicated on display:
The volume increases.
- Press
button.
Output Diagnostic Test Mode
Radio quieter
Indicated on display:
The volume decreases.
- Press
button.
Output Diagnostic Test Mode
Station search up-band
Indicated on display:
Station search for the next radio
station up-band which will appear in
radio display (and in display in
instrument cluster where
applicable).
- Press
button.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-70
Output Diagnostic Test Mode
Station search down-band
Indicated on display:
Station search for next radio station
down-band which will appear in radio
display and (and in display in
instrument cluster where
applicable).
- Press
button.
Output Diagnostic Test Mode
END
Indicated on display:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- End Output (function 06)
Page
01-73
.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
01-71
Diagnostic Trouble Code
(DTC) memory, erasing
(function 05)
Note:
After erasing the DTC memory its
contents will automatically be
indicated. If the DTC memory cannot
be erased, again check DTC
memory and repair malfunctions.
Requirements
All malfunctions repaired.
DTC memory checked
Page
01-62
.
After Diagnostic Trouble Code (DTC)
memory has been successfully
checked:
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press keys 0 and 5. (05 selects
the "Erase DTC memory"
function.)
Rapid data transfer
Q
05 Erase DTC memory
Indicated on display:
- Confirm entry with key Q.
Rapid data transfer
DTC memory is erased!
Indicated on display:
The DTC memory is now erased.
- Press
key.
Multi-function steering wheel through 11.01, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст