Volkswagen Golf / Golf GTI / Jetta. Manual — part 794
- Remove bolts - arrows - (10 Nm) and
pull seat height adjuster - 1 - out of seat
frame.
Installing
Installation is reverse of removal.
Note:
n
Tightening torque for bolts - arrows - is 10 Nm (7 ft
lb).
Cable for locking backrest, assembly
overview (2-door)
Front seats
13/2/2005
1. Cover
2. Clip
3. Handle
4. Backrest frame
5. Locking lever
6. Upper cable hook
7. Cable
¡
Removing
72-1, Cable for
locking backrest, removing
and installing (2-door)
8. Center cable guide
9. Lower cable hook
Front seats
13/2/2005
10. Lower cable guide
11. Transfer rod
12. Locking sleeve
Cable for locking backrest, removing and
installing (2-door)
Removing
- Remove seat
72-1, Front seats, removing and
installing
.
- Remove headrest guides
72-1, Headrest guides,
removing and installing
.
- Remove backrest
72-1, Front backrest, removing and
installing
.
- Remove handle - 3 - and unclip cover - 1
- .
- Remove cover and cushion
74-1,
Front backrest cover and upholstery,
removing and installing
.
- Break off four small metal tabs for
locking sleeve - 12 - and drive rest of
locking sleeve - 12 - into transfer rod - 11
- using a drift.
Note:
n
Clip - 2 - and locking sleeve - 12 -
must always be replaced after each
disassembly.
- Press locking lever - 5 - downward and
pull out cable hook - 6 - .
- Unclip center cable guide - 8 - from
backrest frame - 4 - .
- Pull transfer rod - 11 - far enough out of
backrest frame so that lower cable guide -
10 - can be unclipped.
Front seats
13/2/2005
- Unhook cable hook - 9 - and pull cable -
7 - out of backrest frame - 4 - .
Installing
- Installation is reverse of removal.
Headrest guides, removing and installing
Note:
n
No or parts need to be removed to remove headrest
guides.
Removing
Front seats
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст