Volkswagen Golf / Golf GTI / Jetta. Manual — part 608
50-6
Replacement part
Preparing new part
- Remove excess material.
Connecting plate
- Transfer separating lines to new
part and cut-out.
50 53 55 50 fender connecting plate, replacing
13/2/2005
50-7
Welding in place
- Secure new part and check gaps/mating lines
with attaching parts.
- Weld new part in place, RP-spot weld seam.
- Butt weld parting cut, SG-continuous weld seam.
- Weld in long member for wheel house
50-9
.
50 53 55 50 fender connecting plate, replacing
13/2/2005
50-8
50 72 55
50 long
member
for upper
wheel
house,
replacing
Cutting
location
Note:
If damage is
beyond
prescribed
separating
lines -1-, inner
A pillar must
be replaced as
well.
Partial repair:
A partial repair,
depending on
damage, is
possible using
parting cuts -a-
shown.
- Cut out
upper
wheel
house long
member
according
to degree of
damage.
- Separate
original
joint.
- Remove
excess
material
50 72 55 50 long member for upper wheel house, replacing
13/2/2005
50 72 55 50 long member for upper wheel house, replacing
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст