Volkswagen Golf / Golf GTI / Jetta. Manual — part 1109

92-4

Wiper arms, removing

- Pry-off caps -arrows- with a

screwdriver.

- Loosen nuts -arrows- (do not

remove).

Windshield wiper system

13/2/2005

92-5

- Place locating arms of puller

T10130 -2- under wiper arm -4-
as illustrated.

- Turn spindle screw -1- clockwise

until it engages the wiper shaft
and previously loosened nut -3-
(the nut serves as a centering
guide for spindle - 1-).

- Continue to turn spindle screw -1-

clockwise until the wiper arm -4-
releases from shaft.

- Turn spindle screw -1-

counterclockwise until puller can
be released from assembly.

- Remove nut -3- completely and

remove wiper arm -4-.

- Repeat for remaining wiper arm.

Windshield wiper system

13/2/2005

92-6

Cowl panel, removing

Note:

Cowl panel is clipped into a guide
rail below windshield.

Note:

As of model year 1999, bolts -2- are
no longer used, cowl is simply
clipped on.

- Pull out rubber seal -1- and

remove bolts -2-.

- Remove pollen filter cover.

- Unclip inner fender trim -arrows-

on both sides.

- Carefully press cowl panel out

upward.

Windshield wiper system

13/2/2005

92-7

Wiper assembly, removing

- Disconnect electrical connection

to wiper motor.

- Remove hex bolts -arrows- and

washers.

- Remove complete wiper

assembly.

Windshield wiper system

13/2/2005

Была ли эта страница вам полезна?
Да!Нет
6 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности