Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 236
Tightening Specifications
3.3
Fuel Filler Door, Removing and Installing
Removing
– Push the fuel filler door -1- out of the fuel filler door unit re‐
tainers -2- in direction of -arrows-.
– Remove the fuel filler door.
Installing
– Place the fuel filler door -1- on the fuel filler door unit -2-.
– Push the fuel filler door into the fuel filler door unit retainers.
3.4
Adjusting Element, Removing and Installing
Removing
– Remove the fuel filler door unit. Refer to
⇒ “3.2 Fuel Filler Door Unit, Removing and Installing”,
– To reach the connector, remove the right luggage compart‐
ment side trim panel. Refer to ⇒ Body Interior; Rep. Gr. 70 ;
Luggage Compartment Trim Panels; Luggage Compartment
Side Trim Panel, Removing and Installing .
– Disconnect the connector -4-.
– Pull the adjusting element -1- out of the side panel in direction
of -arrow a-.
Installing
– Connect the connector -4-.
– Install the grommet -3- in the side panel.
– Push the adjusting element -1- in the side panel in direction of
-arrow b-.
4
Special Tools
Special tools and workshop equipment required
♦ Torque Wrench 1331 5-50Nm - VAG1331-
♦ Pry Lever - 80-200-
♦ Gauge - Gap Adjustment - 3371-
57 – Front Doors, Central Locking System
1
Door
⇒ “1.1 Overview - Door”, page 79
⇒ “1.2 Inner Door Seal, Removing and Installing”, page 82
⇒ “1.3 Outer Door Seal, Removing and Installing”, page 84
⇒ “1.4 Door, Removing and Installing”, page 86
⇒ “1.5 Door, Adjusting”, page 89
⇒ “1.6 Catch, Adjusting”, page 91
⇒ “1.7 Door Arrester, Removing and Installing”, page 93
1.1
Overview - Door
Note
♦
The illustration shows the left side. The right side is identical.
♦
After replacing the A-pillar, the bolts -2 and 5- as well as -14 and 17- are to be tightened to another tightening
specification.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст