Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 235
Tightening Specifications
2.13
Gas-Filled Strut, Venting
– Clamp the area -x- of the gas strut in the vise, area x = 50 mm.
WARNING
Wear protective eyewear when sawing.
Cover the area of the saw cut with a cleaning cloth.
Dispose of the oil and cleaning cloths properly.
– Cut open the cylinder of the gas-filled strut within the first third
of the total cylinder length, using the piston rod side of the
cylinder as a reference point.
3
Fuel Filler Door Unit
⇒ “3.1 Overview - Fuel Filler Door Unit”, page 73
⇒ “3.2 Fuel Filler Door Unit, Removing and Installing”,
page 74
⇒ “3.3 Fuel Filler Door, Removing and Installing”, page 76
⇒ “3.4 Adjusting Element, Removing and Installing”, page 77
3.1
Overview - Fuel Filler Door Unit
1 - Fuel Filler Door
❑ Removing and instal‐
ling. Refer to
2 - Fuel Filler Door Unit
❑ Removing and instal‐
ling. Refer to
.
3 - Water Drain Hose
❑ Routed between the
wheel housing and the
wheel housing liner
4 - Adjusting Element
❑ Removing and instal‐
ling. Refer to
.
5 - Connector
6 - Screw
❑ 1.5 Nm
3.2
Fuel Filler Door Unit, Removing and Installing
Removing
– Remove the fuel filler cap.
– Remove the bolt -3-.
– Remove the fuel filler door unit boot from the filler neck -2-.
– If equipped, remove the fuel filler door unit boot from the re‐
ducing agent filler neck.
– Remove the fuel filler door unit slightly toward the rear in di‐
rection of -arrow a- out of the retainers.
– Tilt the fuel filler door unit -1- out of the side panel in direction
of -arrow b-.
– Guide the water drain hose -4- out of the side panel.
Installing
– Insert the water drain hose -4- through the opening in the fuel
filler door unit -1- and then pull it all the way through.
– Push the water drain hose -4- into the side panel in direction
of -arrow a-.
– Pivot the fuel filler door unit -1- in the side pane in direction of
-arrow b- and pull the boot over the filler neck -2-.
– If equipped, pull the fuel filler door unit boot over the reducing
agent filler neck.
– Push the fuel filler door unit completely into the side panel in
direction of -arrow c-.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст