Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 433
3.4
Overview - Center Armrest
1 - Center Cushion
❑ Allocation. Refer to the
Parts Catalog.
❑ Removing and instal‐
ling. Refer to
2 - Center Armrest
❑ Removing and instal‐
ling. Refer to
3 - Door
❑ For the pass-through
opening
❑ Removing and instal‐
ling. Refer to
4 - Trim
❑ For the rear lid locking
mechanism
❑ Removing and instal‐
ling. Refer to
.
5 - Stop Strip
❑ Clipped into the rear
seat backrest
❑ Removing and installing. Refer to
⇒ “3.11 Pass-Through Cover Frame, Removing and Installing”, page 387
6 - Cover Frame
❑ For the pass-through opening
❑ Clipped into the rear seat backrest
❑ Removing and installing. Refer to
⇒ “3.11 Pass-Through Cover Frame, Removing and Installing”, page 387
7 - Right 2/3 Rear Seat Backrest
❑ With pass-through opening
❑ Allocation. Refer to the Parts Catalog.
8 - Screw
❑ 12 Nm
❑ Quantity: 2
❑ Self-tapping
❑ Replace after removing
9 - Screw
❑ 8 Nm
❑ Quantity: 2
3.5
Overview - Side Cushion
1 - Side Cushion
❑ Allocation. Refer to the
Parts Catalog.
❑ Removing and instal‐
ling. Refer to
.
2 - Mounting Grommet
❑ Clipped into the side
cushion bracket
❑ Replace if damaged
3 - Side Cushion Bracket
4 - Screw
❑ 8 Nm
5 - Nut
❑ 8 Nm
3.6
Overview - Backrest Remote Release
Note
The illustration shows the backrest remote release on the left
side. The right side is similar.
1 - Actuator for Backrest Re‐
mote Release
❑ Removing and instal‐
ling. Refer to
.
2 - Vehicle-Side Release Ca‐
ble
❑ Removing and instal‐
ling. Refer to
.
3 - Connecting Part
❑ Release cable for back‐
rest remote release, dis‐
connecting and con‐
necting. Refer to
4 - Seat-Side Release Cable
❑ Removing and instal‐
ling. Refer to
.
5 - Rear Seat Backrest Locking
Mechanism
❑ Removing and instal‐
ling. Refer to
⇒ “3.10 Rear Seat Backrest Locking Mechanism, Removing and Installing”, page 386
3.7
Bench Seat/Single Seat, Removing and
Installing
Removing
– Move the front seats all the way forward.
– Unclip the guides -1- for the LATCH child seat anchor (quan‐
tity: 4) from the anchors. Refer to
– With both hands, grasp the rear bench seat under the seat
frame.
– Pull the rear bench seat -1- up forcefully with both hands in
direction of -arrows A- so the wire hooks -2- on the rear bench
seat release from the mounting grommet -3-.
– Repeat the procedure on the other side of the rear bench seat
in direction of -arrows B-.
– Gently lift the rear bench seat -1- at front and slide the wire
frame -2- out of the hook -3- toward the rear.
– Remove the rear bench seat from the vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст