Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 252
3.5
Ignition Key Cap, Removing and Installing
Removing
– Lift up the battery compartment cover. Refer to
⇒ “3.4 Key Battery, Removing and Installing”, page 137
– Remove the bolt -1-.
– Remove the cap -2- at the side from the ignition key in direction
of -arrow-.
Installing
Note
The threads for a new cap are cut in by the screw -1-.
– Push the cap -2- sideways onto the ignition key.
– Install the screw -1-.
– Push on the battery compartment cover.
4
Special Tools
Special tools and workshop
equipment required
♦ Wrench - Door Adjusting -
3320-
♦ Door Adjusting Wrench -
Joint - 3320/1-
♦ Wrench - Door Adjusting -
Box Wrench - 3320/2-
♦ Wrench - Door Adjusting -
Box Wrench - 3320/3-
♦ Torque Wrench 1331
5-50Nm - VAG1331-
♦ Cylinder Head Bolt Socket -
3410-
♦ Gauge - Gap Adjustment -
3371-
♦ Trim Removal Wedge -
3409-
♦ Wedge Set - T10383-
♦ Lock Cylinder Housing Assembly Tool - T10389-
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
58 – Rear Doors
1
Door
⇒ “1.1 Overview - Door”, page 143
⇒ “1.2 Door, Removing and Installing”, page 145
⇒ “1.3 Door, Adjusting”, page 149
⇒ “1.4 Catch, Adjusting”, page 151
⇒ “1.5 Door Arrester, Removing and Installing”, page 152
⇒ “1.6 Inner Door Seal, Removing and Installing”, page 154
⇒ “1.7 Outer Door Seal, Removing and Installing”, page 157
1.1
Overview - Door
Note
♦
The illustration shows the left side. The right side is identical.
♦
After replacing the B-pillar, the bolts -2 and 5- as well as -14 and 17- are to be tightened to another tightening
specification.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст