Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 933
4.2
Overview - Rear Lid Tail Lamps
⇒ “4.2.1 Overview - Rear Lid Tail Lamps, Sedan, with Bulbs”,
page 137
⇒ “4.2.2 Overview - Rear Lid Tail Lamps, Sedan, with LED”, page
138
⇒ “4.2.3 Overview - Rear Lid Tail Lamps, Wagon”, page 139
4.2.1
Overview - Rear Lid Tail Lamps, Sedan, with Bulbs
1 - Bulb Socket
❑ For Left Back-Up Lamp
Bulb - M16- / Right
Back-Up Lamp Bulb -
M17-
❑ Removing and instal‐
ling. Refer to
.
2 - Bulb Holder
3 - Rear Fog Lamp Bulb
❑ Left Rear Fog Lamp
Bulb - L46-
❑ Right Rear Fog Lamp
Bulb - L47-
❑ Removing and instal‐
ling. Refer to
.
4 - Tail Lamp
❑ Left Tail Lamp 2 - MX5-
❑ Right Tail Lamp 2 -
MX6-
❑ Tail lamp assembly in‐
side the rear lid
❑ Removing and instal‐
ling. Refer to
5 - Seal
❑ Self-adhesive
❑ Replace if damaged.
6 - Nut
❑ 3 Nm
❑ Quantity: 2
7 - Tail Lamp Bulb
❑ Right Tail Lamp Bulb - M2-
❑ Left Tail Lamp Bulb - M4-
❑ Removing and installing. Refer to
⇒ “4.6 Right and Left Tail Lamp Bulb M2 / M4 , Removing and Installing”, page 145
.
8 - Back-Up Lamp Bulb
❑ Left Back-Up Lamp Bulb - M16-
❑ Right Back-Up Lamp Bulb - M17-
❑ Removing and installing. Refer to
⇒ “4.9 Back-Up Lamp, Removing and Installing”, page 152
4.2.2
Overview - Rear Lid Tail Lamps, Sedan, with LED
1 - Bulb Socket
❑ For Left Back-Up Lamp
Bulb - M16- / Right
Back-Up Lamp Bulb -
M17-
❑ Removing and instal‐
ling. Refer to
2 - Back-Up Lamp Bulb
❑ Left Back-Up Lamp Bulb
- M16-
❑ Right Back-Up Lamp
Bulb - M17-
❑ Removing and instal‐
ling. Refer to
3 - Seal
❑ Self-adhesive
❑ Replace if damaged.
4 - Tail Lamp
❑ Left Tail Lamp 2 - MX5-
❑ Right Tail Lamp 2 -
MX6-
❑ Tail lamp assembly in‐
side the rear lid
❑ Removing and instal‐
ling. Refer to
.
5 - Nut
❑ 3 Nm
❑ Quantity: 2
4.2.3
Overview - Rear Lid Tail Lamps, Wagon
1 - Bulb Socket
❑ For Left Back-Up Lamp
Bulb - M16- / Right
Back-Up Lamp Bulb -
M17-
❑ Removing and instal‐
ling. Refer to
.
2 - Bulb Holder
3 - Rear Fog Lamp Bulb
❑ Left Rear Fog Lamp
Bulb - L46-
❑ Right Rear Fog Lamp
Bulb - L47-
❑ Removing and instal‐
ling. Refer to
.
4 - Tail Lamp
❑ Left Tail Lamp 2 - MX5-
❑ Right Tail Lamp 2 -
MX6-
❑ Tail lamp assembly in‐
side the rear lid
❑ Removing and instal‐
ling. Refer to
.
5 - Nut
❑ 3 Nm
❑ Quantity: 2
6 - Seal
❑ Self-adhesive
❑ Replace if damaged.
7 - Tail Lamp Bulb
❑ Right Tail Lamp Bulb - M2-
❑ Left Tail Lamp Bulb - M4-
❑ Removing and installing. Refer to
⇒ “4.6.2 Right and Left Tail Lamp Bulb M2 / M4 , Removing and Installing, Wagon”, page 146
8 - Back-Up Lamp Bulb
❑ Left Back-Up Lamp Bulb - M16-
❑ Right Back-Up Lamp Bulb - M17-
❑ Removing and installing. Refer to
⇒ “4.9.2 Back-Up Lamp Bulb, Removing and Installing, Wagon”, page 153
4.3
Rear Lid Tail Lamp, Removing and In‐
stalling
⇒ “4.3.1 Rear Lid Tail Lamp, Removing and Installing, Sedan”,
page 140
⇒ “4.3.2 Rear Lid Tail Lamp, Removing and Installing, Wagon”,
4.3.1
Rear Lid Tail Lamp, Removing and In‐
stalling, Sedan
The removal and installation is described for the left side. Re‐
moving and installing on the right side is identical.
IF the LED is faulty, the tail lamp must be completely replaced.
Removing
– Turn off the ignition and all electrical equipment.
– Remove the ignition key, if equipped.
Caution
Risk of damaging the component surfaces.
♦ When positioning a prying tool, put commercially available
adhesive tape over the component in the visible area.
– If necessity insert a narrow screwdriver in the opening on the
side.
– Pry up the cover -1- in the direction of -arrow-.
– Release and disconnect the connector -2-.
– Remove the nuts -1-.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст