Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 420
❑ The design depends on the vehicle equipment
❑ Removing and installing. Refer to
⇒ “2.14.1 Door Sill Side Seat Trim, Removing and Installing, Except Power Seat”, page 345
.
9 - Seat Trim Panel
❑ Tunnel side
❑ Removing and installing. Refer to
⇒ “2.13 Tunnel-Side Seat Trim, Removing and Installing”, page 344
10 - Seat Belt Latch
❑ Removing and installing. Refer to
⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120
2.5.2
Overview - Seat Pan, Power
Note
The illustration shows the driver side seat pan. The seat pan on the front passenger side is similar.
1 - Seat Cushion
❑ Seat Pan Cover and
Padding, Removing and
installing. Refer to
❑ Seat pan cover and
cushion, separating.
Refer to
.
2 - Seat Pan
3 - Screw
❑ 22 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the
bolts must be cleaned,
for example, with a
thread tap
4 - Screw
❑ 8 Nm
❑ Quantity: 4
5 - Bracket
❑ For the sill-side seat trim
panel
❑ Removing and instal‐
ling. Refer to
Installing, Power Seat”, page 349
.
6 - Expanding Rivet
7 - Seat Trim Panel
❑ Sill-side
❑ Removing and installing. Refer to
⇒ “2.14.2 Door Sill Side Seat Trim, Removing and Installing, Power Seat”, page 347
8 - Seat Pan Lower Frame
❑ Driver Seat Forward/Back Adjustment Motor - V28-
❑ Front Passenger Seat Forward/Back Adjustment Motor - V31-
❑ Cannot be disassembled
❑ Removing and installing. Refer to
⇒ “2.20 Seat Pan with Driver/Front Passenger Seat Forward/Back Adjustment Motor V28 / V31 , Re‐
moving and Installing”, page 357
❑ To replace, install the seat belt latch in the new lower frame. Refer to
⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120
9 - Bushing
❑ Inserted in all bearing locations
❑ Cannot be replaced with service equipment
❑ If the bushing is damaged, the seat pan lower frame must be replaced
10 - Seat Trim Panel
❑ Tunnel side
❑ Removing and installing. Refer to
⇒ “2.13 Tunnel-Side Seat Trim, Removing and Installing”, page 344
.
11 - Screw
❑ Refer to
⇒ “1.5 Overview - Front Seat Belt Latch”, page 95
12 - Seat Belt Latch
❑ Removing and installing. Refer to
⇒ “1.14 Front Seat Belt Latch, Removing and Installing”, page 120
.
2.5.3
Overview - Torsion Bar
1 - Seat Pan
2 - Bearing
❑ For the torsion bar
❑ Slide into the guide
3 - Torsion Bar
❑ Lubricated. Refer to the
Parts Catalog for the
grease.
2.6
Overview - Seat Height Adjuster
⇒ “2.6.1 Overview - Seat Height Adjuster, Except Power Seat”,
page 331
⇒ “2.6.2 Overview - Seat Height Adjuster, Power Seat”,
2.6.1
Overview - Seat Height Adjuster, Except Power Seat
1 - Screws
❑ 6.5 Nm
❑ Quantity: 2
❑ Note the different bolt
length -item 8-
2 - Seat Height Adjusting Lever
❑ For seat height adjust‐
ment
❑ Removing and instal‐
ling. Refer to
3 - Clip
❑ Make sure it is secure
4 - Seat Height Adjustment
Handle
❑ Removing and instal‐
ling. Refer to
.
5 - Seat Pan
❑ Overview. Refer to
6 - Lock Washer
❑ Replace after removing
7 - Seat Height Adjuster
❑ Removing and instal‐
ling. Refer to
⇒ “2.19.1 Seat Height Adjuster, Removing and Installing, Except Power Seat”, page 353
.
8 - Screw
❑ 10 Nm
❑ Note the different bolt lengths -item 1-
9 - Screws
❑ 8 Nm
❑ Quantity: 2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст