Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 419
❑ Backrest release, removing and installing. Refer to
⇒ “2.26 Backrest Release, Removing and Installing”, page 362
.
❑ Backrest release mount, removing and installing. Refer to
⇒ “2.28 Backrest Release Mount, Removing and Installing”, page 363
.
7 - Lever
❑ For manually adjusting lumbar support
❑ Removing and installing. Refer to
⇒ “2.22 Lumbar Support Adjuster, Removing and Installing”, page 359
8 - Hand Wheel
❑ For manual backrest adjustment
❑ Removing and installing. Refer to
⇒ “2.21.1 Backrest Adjuster, Removing and Installing, Except Power Seat”, page 358
9 - Screw
❑ 34 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the bolts must be cleaned, for example, with a thread tap
10 - Seat Pan
❑ Overview. Refer to
⇒ “2.5.1 Overview - Seat Pan, Except Power Seat”, page 327
.
2.4.2
Overview - Front Backrest, Power Seat
Note
The illustration shows the driver side front backrest. The front backrest on the front passenger side is similar.
1 - Headrest
❑ Removing and instal‐
ling. Refer to
.
❑ Must be correctly locked
in the headrest guides
2 - Cover
❑ Quantity: 2
3 - Headrest Guide
❑ Quantity: 2
❑ Removing and instal‐
ling. Refer to
.
4 - Backrest
❑ Removing and instal‐
ling. Refer to
.
❑ Backrest Cover and
Cushion, Removing and
installing. Refer to
.
❑ Backrest Cover and
Cushion, Separating.
Refer to
❑ With power lumbar support. Refer to
5 - Screw
❑ 34 Nm
❑ Quantity: 4
❑ Self-locking
❑ Replace after removing
❑ Threaded holes for the bolts must be cleaned, for example, with a thread tap
6 - Seat Pan
2.4.3
Overview - Front Backrest, Power Lumbar Support
1 - No Replacement Part
❑ The washer is molded in
the lumbar support.
2 - Lumbar Support
❑ Driver side with Driver
Seat Lumbar Support
Curvature Adjustment
Motor - V125- / Driver
Seat Lumbar Support
Height Adjustment Mo‐
tor - V129-
❑ Front passenger side
with Front Passenger
Seat Lumbar Support
Curvature Adjustment
Motor - V126- / Front
Passenger Seat Lum‐
bar Support Height Ad‐
justment Motor - V130-
❑ Removing and instal‐
ling. Refer to
.
3 - Backrest Frame
4 - Rivet
2.5
Overview - Seat Pan
⇒ “2.5.1 Overview - Seat Pan, Except Power Seat”, page 327
⇒ “2.5.2 Overview - Seat Pan, Power”, page 328
⇒ “2.5.3 Overview - Torsion Bar”, page 330
2.5.1
Overview - Seat Pan, Except Power Seat
Note
The illustration shows the driver side seat pan. The seat pan on the front passenger side is similar.
1 - Seat Cushion
❑ Seat Pan Cover and
Padding, Removing and
installing. Refer to
.
❑ Seat pan cover and
cushion, separating.
Refer to
2 - Seat Pan
❑ Vehicle equipment with
a storage compartment.
3 - Bracket
❑ For the sill-side seat trim
panel
❑ Removing and instal‐
ling. Refer to
4 - Screw
❑ 8 Nm
❑ Quantity: 3
5 - Hand Wheel
❑ For manual backrest ad‐
justment
❑ Removing and instal‐
ling. Refer to
⇒ “2.21.1 Backrest Adjuster, Removing and Installing, Except Power Seat”, page 358
.
6 - Expanding Rivet
7 - Handle
❑ For seat height adjustment. Refer to
❑ Removing and installing. Refer to
⇒ “2.18 Seat Height Adjustment Handle, Removing and Installing”, page 352
8 - Seat Trim Panel
❑ Sill-side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст