Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 345
1.8
Driver Side Storage Compartment, Removing and Installing
Removing
– Open the driver side storage compartment -1- in the direction
of the -arrow-.
– Loosen the driver side storage compartment -1- from the up‐
per retainers and remove it from the instrument panel -2-.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
1.9
Driver Side Instrument Panel Cover, Re‐
moving and Installing
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Removing
– Remove the driver side instrument panel side cover. Refer to
⇒ “3.2 Instrument Panel Side Cover, Removing and Installing”,
.
– Remove the footwell cover on the driver side. Refer to
⇒ “1.7 Driver Side Footwell Cover, Removing and Installing”,
– Remove the driver side storage compartment. Refer to
⇒ “1.8 Driver Side Storage Compartment, Removing and In‐
– Remove center console. Refer to
⇒ “3.8 Center Console, Removing and Installing”, page 59
– Remove the side screw -2-.
– Remove the lower screw -3-.
– Remove the bolts -4 and 5-.
– Unclip the driver side instrument panel cover -1- from the in‐
strument panel -arrows- and remove.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
⇒ “1.3 Overview - Driver Side Instrument Panel Cover”,
1.10
Instrument Cluster Gap Cover, Remov‐
ing and Installing
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
Removing
– Release the steering wheel adjustment lever.
– Pull out the steering wheel completely, push it downward and
lock it.
– Loosen the instrument cluster gap cover -2- off the mounts on
the instrument cluster -1- using the Trim Removal Wedge -
3409- -arrows A-.
– Loosen the instrument cluster gap cover -2- off the mounts on
the upper steering column trim panel -3- -arrows B- and re‐
move.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
1.11
Upper Steering Column Trim Panel, Re‐
moving and Installing
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
Removing
– Release the steering wheel adjustment lever.
– Pull out the steering wheel completely, push it downward and
lock it.
– Loosen the instrument cluster gap cover off the mounts on the
instrument cluster using the Trim Removal Wedge - 3409- in
direction of -arrows A-.
– Loosen the upper steering column trim panel -1- off the lower
steering column trim panel mounts -arrow B- and -arrow C-.
To do so, turn the steering wheel accordingly.
– Disengage the upper steering column trim panel from the low‐
er steering column trim panel and remove it with the instrument
cluster gap cover.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
1.12
Lower Steering Column Trim Panel, Re‐
moving and Installing
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Removing
– Remove the upper steering column trim. Refer to
⇒ “1.11 Upper Steering Column Trim Panel, Removing and
.
– If necessary, remove the ignition key.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст