Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 365
– Remove the automatic belt retractor -3- from the mount.
Installing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1.2 Safety Precautions for Pyrotechnic Components”,
.
♦ Before handling pyrotechnic components (for example,
connecting the connector), the person handling it must
“discharge static electricity”. This can be done by touching
the door striker pin, for example.
Install in reverse order of removal while paying attention to the
following:
– If parts of the seat belt system are removed due to an accident,
replace the belt system bolts.
Note
Make sure the connectors are pushed in all the way and that they
engage audibly.
WARNING
The ignition must be on when connecting the battery. If pyro‐
technic components (for example, airbag, belt tensioner) are
not repaired correctly, they may deploy unintentionally after
connecting battery. There must not be anyone inside the ve‐
hicle when connecting the battery.
– Connect the battery ground cable with the ignition turned on.
Refer to ⇒ Electrical Equipment; Rep. Gr. 27 ; Battery; Bat‐
tery, Disconnecting and Connecting .
WARNING
If the ignition is not switched on after the battery is reconnected
- “indicator lamps in the instrument cluster do not light up” - the
ignition (key/button) may only be switched on when the driver
seat is positioned all the way back.
Tightening Specifications
♦ Refer to
⇒ “1.3.2 Overview - Three-Point Seat Belt, 2-Door Sedan, with
1.8.3
Rear Three-Point Seat Belt, Removing
and Installing, 4-Door Sedan, without
Belt Tensioner
Removing
– Remove the rear shelf compartment. Refer to
Pro
te
c
t
ed
b
y
co
p
y
rig
h
t.
C
o
p
y
in
g
fo
r
pr
iv
a
t
e
o
r
c
o
m
m
e
r
c
ia
l
p
u
rp
o
s
e
s
,
i
n
p
a
rt
o
r i
n
w
h
o
le
,
is
n
o
t
p
e
r
m
it
t
e
d
u
n
l
e
s
s
ed
b
y
V
olk
sw
a
ge
n AG
.
V
olk
s
w
a
g
en
AG do
es
n
ot g
uar
or a
c
c
ep
t
a
ny
li
a
b
i
li
t
y
w
ith
r
e
s
p
e
c
t
t
o
th
e
c
o
rr
e
c
t
n
e
s
s
o
f
in
fo
r
m
a
tio
n
in
th
is
d
o
c
um
en
t.
C
o
py
rig
ht b
y
V
olk
sw
a
ge
n
A
– Remove the outer rear belt end fitting. Refer to
⇒ “1.12 Rear Outer Belt End Fitting, Removing and Installing”,
.
– Remove the bolt -1-.
– Remove the automatic belt retractor -2- from the mount.
Installing
Install in reverse order of removal while paying attention to the
following:
– If parts of the seat belt system are removed due to an accident,
replace the belt system bolts.
Tightening Specifications
♦ Refer to
⇒ “1.3.3 Overview - Three-Point Seat Belt, 4-Door Sedan,
without Belt Tensioner”, page 90
1.8.4
Rear Three-Point Seat Belt, Removing
and Installing, 4-Door Sedan, with Belt
Tensioner
Removing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1.2 Safety Precautions for Pyrotechnic Components”,
♦ Observe the disposal regulations for pyrotechnical com‐
ponents. Refer to
⇒ “1.3 Airbag, Belt Tensioner and Battery Cut-Out Units,
Storing, Transporting and Disposing (Pyrotechnic Com‐
– Disconnect the battery ground cable with the ignition turned
on. Refer to ⇒ Electrical Equipment; Rep. Gr. 27 ; Battery;
Battery, Disconnecting and Connecting .
– Remove the rear shelf compartment. Refer to
⇒ “6.9 Rear Shelf Compartment, Removing and Installing”,
.
– Remove the outer rear belt end fitting. Refer to
⇒ “1.12 Rear Outer Belt End Fitting, Removing and Installing”,
.
WARNING
Electrostatic discharges can lead to unintended deployment of
the airbag. Therefore the technician must discharge static elec‐
tricity from the body before separating the ignition and ground
wiring. This is done, for example, by briefly touching the body
or door striker.
– Disconnect the wiring harness and unclip the connector -1-.
– Remove the bolt -2-.
– Remove the automatic belt retractor -3- from the mount.
Installing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1.2 Safety Precautions for Pyrotechnic Components”,
.
♦ Before handling pyrotechnic components (for example,
connecting the connector), the person handling it must
“discharge static electricity”. This can be done by touching
the door striker pin, for example.
Install in reverse order of removal while paying attention to the
following:
– If parts of the seat belt system are removed due to an accident,
replace the belt system bolts.
Note
Make sure the connectors are pushed in all the way and that they
engage audibly.
WARNING
The ignition must be on when connecting the battery. If pyro‐
technic components (for example, airbag, belt tensioner) are
not repaired correctly, they may deploy unintentionally after
connecting battery. There must not be anyone inside the ve‐
hicle when connecting the battery.
– Connect the battery ground cable with the ignition turned on.
Refer to ⇒ Electrical Equipment; Rep. Gr. 27 ; Battery; Bat‐
tery, Disconnecting and Connecting .
WARNING
If the ignition is not switched on after the battery is reconnected
- “indicator lamps in the instrument cluster do not light up” - the
ignition (key/button) may only be switched on when the driver
seat is positioned all the way back.
Tightening Specifications
♦ Refer to
⇒ “1.3.4 Overview - Three-Point Seat Belt, 4-Door Sedan, with
1.8.5
Rear Three-Point Seat Belt, Removing
and Installing, Wagon without Belt Ten‐
sioner
Removing
– Remove the bench seat. Refer to
– Remove the rear seat backrest. Refer to
⇒ “3.8 Rear Seat Backrest, Removing and Installing”,
.
– Remove the D-pillar trim panel. Refer to
⇒ “5.15 D-Pillar Trim Panel, Removing and Installing”,
.
– Luggage Compartment Side Trim Panel, Removing and In‐
stalling. Refer to
⇒ “6.12.2 Luggage Compartment Side Trim Panel, Removing
and Installing, Wagon”, page 291
– Remove the outer rear belt end fitting. Refer to
⇒ “1.12 Rear Outer Belt End Fitting, Removing and Installing”,
.
– Remove the bolt -1-.
– Pull the seat belt -3- under the seat belt guide -4- forward.
– Remove the automatic belt retractor -2- from the mount.
Installing
Install in reverse order of removal while paying attention to the
following:
– If parts of the seat belt system are removed due to an accident,
replace the belt system bolts.
Tightening Specifications
♦ Refer to
⇒ “1.3.5 Overview - Three-Point Seat Belt, Wagon without Belt
1.8.6
Rear Three-Point Seat Belt, Removing
and Installing, Wagon with Belt Tension‐
er
Removing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1 Safety Precautions”, page 1
.
♦ Observe the disposal regulations for pyrotechnical com‐
ponents.
– Disconnect the battery ground cable with the ignition turned
on. Refer to ⇒ Electrical Equipment; Rep. Gr. 27 ; Battery;
Battery, Disconnecting and Connecting .
– Remove the bench seat. Refer to
⇒ “1.12 Rear Outer Belt End Fitting, Removing and Installing”,
.
– Remove the rear seat backrest. Refer to
⇒ “3.8 Rear Seat Backrest, Removing and Installing”,
.
– Remove the D-pillar trim panel. Refer to
⇒ “5.15 D-Pillar Trim Panel, Removing and Installing”,
.
– Luggage Compartment Side Trim Panel, Removing and In‐
stalling. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст