Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 871
9 - Shock Absorber with Right Rear Damping Adjustment Valve - N339-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
10 - Shock Absorber with Left Rear Damping Adjustment Valve - N338-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
11 - Shock Absorber with Left Front Damping Adjustment Valve - N336-
❑ Removing and installing the suspension strut. Refer to
⇒ “3.2 Suspension Strut, Removing and Installing”, page 45
❑ Servicing the suspension strut. Refer to
⇒ “3.3 Suspension Strut, Servicing”, page 51
.
1.1.2
Overview - Electronic Damping, Multi-Link Suspension, Golf
1 - Right Front Level Control
Sensor - G289-
❑ Removing and instal‐
ling. Refer to
2 - Right Front Body Accelera‐
tion Sensor - G342-
❑ Removing and instal‐
ling. Refer to
3 - Left Rear Body Acceleration
Sensor - G699-
❑ Component location: in
the luggage compart‐
ment on the left shock
absorber tower behind
the left side trim panel
❑ Removing and instal‐
ling. Refer to
4 - Electronic Damping Control
Module - J250-
❑ Removing and instal‐
ling. Refer to
ule J250 , Removing and Installing, Golf”, page 272
❑ Component location: the Electronic Damping Control Module - J250- is installed in the luggage com‐
partment behind the left side trim panel.
❑ If the Electronic Damping Control Module - J250- is being replaced, the
Replace control module
function must be performed using the
⇒ “3.3 Suspension Strut, Servicing”, page 51
.
❑ If the control position was reprogrammed and if the vehicle has lane assist, then the front camera for the
driver assistance systems must be calibrated.
5 - Left Rear Level Control System Sensor - G76-
❑ Removing and installing. Refer to
6 - Left Front Body Acceleration Sensor - G341-
❑ Removing and installing. Refer to
⇒ “1.3 Left/Right Front Body Acceleration Sensor G341 / G342 , Removing and Installing”, page 274
7 - Left Front Level Control System Sensor - G78-
❑ Removing and installing. Refer to
⇒ “2.3 Left/Right Front Level Control System Sensor G78 / G289 , Removing and Installing”,
8 - Shock Absorber with Right Front Damping Adjustment Valve - N337-
❑ Removing and installing the suspension strut. Refer to
⇒ “3.2 Suspension Strut, Removing and Installing”, page 45
.
❑ Servicing the suspension strut. Refer to
⇒ “3.3 Suspension Strut, Servicing”, page 51
9 - Shock Absorber with Right Rear Damping Adjustment Valve - N339-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
.
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
.
10 - Shock Absorber with Left Rear Damping Adjustment Valve - N338-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
.
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
.
11 - Shock Absorber with Left Front Damping Adjustment Valve - N336-
❑ Removing and installing the suspension strut. Refer to
⇒ “3.2 Suspension Strut, Removing and Installing”, page 45
.
❑ Servicing the suspension strut. Refer to
1.1.3
Overview - Electronic Damping, Multi-Link Suspension, Golf Wagon
1 - Right Front Level Control
Sensor - G289-
❑ Removing and instal‐
ling. Refer to
.
2 - Right Front Body Accelera‐
tion Sensor - G342-
❑ Removing and instal‐
ling. Refer to
.
3 - Left Rear Body Acceleration
Sensor - G699-
❑ Component location: In
the luggage compart‐
ment on the left shock
absorber tower behind
the left side trim panel
❑ Removing and instal‐
ling. Refer to
4 - Electronic Damping Control
Module - J250-
❑ Removing and instal‐
ling. Refer to
ule J250 , Removing and Installing, Golf Wagon”, page 273
❑ Component location: the Electronic Damping Control Module - J250- is installed in the luggage com‐
partment behind the left side trim panel.
❑ If the Electronic Damping Control Module - J250- is being replaced, the
Replace control module
function must be performed using the Vehicle Diagnostic Tester .
❑ If the control position was reprogrammed and if the vehicle has lane assist, then it will then be necessary
to calibrate the driver assistance systems front camera. Refer to
⇒ “6.1 Driver Assistance Systems Front Camera, Calibrating”, page 327
5 - Left Rear Level Control System Sensor - G76-
❑ Removing and installing, FWD. Refer to
.
❑ Removing and installing, AWD. Refer to
6 - Left Front Body Acceleration Sensor - G341-
❑ Removing and installing. Refer to
⇒ “1.3 Left/Right Front Body Acceleration Sensor G341 / G342 , Removing and Installing”, page 274
.
7 - Left Front Level Control System Sensor - G78-
❑ Removing and installing. Refer to
⇒ “2.3 Left/Right Front Level Control System Sensor G78 / G289 , Removing and Installing”,
8 - Shock Absorber with Right Front Damping Adjustment Valve - N337-
❑ Removing and installing the suspension strut. Refer to
⇒ “3.2 Suspension Strut, Removing and Installing”, page 45
.
❑ Servicing the suspension strut. Refer to
⇒ “3.3 Suspension Strut, Servicing”, page 51
9 - Shock Absorber with Right Rear Damping Adjustment Valve - N339-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
.
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
.
10 - Shock Absorber with Left Rear Damping Adjustment Valve - N338-
❑ Shock absorber, removing and installing. Refer to
⇒ “6.2 Shock Absorber, Removing and Installing”, page 193
.
❑ Shock absorber, servicing. Refer to
⇒ “6.3 Shock Absorber, Servicing”, page 200
.
11 - Shock Absorber with Left Front Damping Adjustment Valve - N336-
❑ Removing and installing the suspension strut. Refer to
⇒ “3.2 Suspension Strut, Removing and Installing”, page 45
.
❑ Servicing the suspension strut. Refer to
⇒ “3.3 Suspension Strut, Servicing”, page 51
1.2
Electronic Damping Control Module -
J250- , Removing and Installing
⇒ “1.2.1 Electronic Damping Control Module J250 , Removing
and Installing, Golf”, page 272
⇒ “1.2.2 Electronic Damping Control Module J250 , Removing
and Installing, Golf Wagon”, page 273
1.2.1
Electronic Damping Control Module -
J250- , Removing and Installing, Golf
Special tools and workshop equipment required
♦ Vehicle Diagnostic Tester
Removing
Component location: the Electronic Damping Control Module -
J250- is installed in the luggage compartment behind the left side
trim panel.
– Disconnect the battery. Refer to ⇒ Electrical Equipment; Rep.
Gr. 27 ; Battery; Battery, Disconnecting and Connecting .
– Remove the ignition key.
Vehicles with “Keyless Access” Keyless Locking and Starting
System
– Switch the ignition off and open the driver door so the steering
wheel lock engages.
Continuation for All Vehicles
– Remove the left luggage compartment side trim panel. Refer
to ⇒ Body Interior; Rep. Gr. 70 ; Luggage Compartment Trim
Panels; Luggage Compartment Side Trim Panel, Removing
and Installing .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст