Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 777
4.5
ESP Sensor Unit - G419- , Removing
and Installing
The Transverse Acceleration Sensor - G200- , the Rotation Rate
Sensor - G202- and the Longitudinal Acceleration Sensor - G251-
are installed together with the Electromechanical Parking Brake
Control Module - J540- in the ABS Control Module - J104- .
The components cannot be replaced individually.
– ABS Control Module - J104- , removing and installing. Refer
to
⇒ “3.2 ABS Control Module J104 / ABS Hydraulic Unit N55 ,
Removing and Installing”, page 17
.
4.6
Steering Angle Sensor - G85- , Remov‐
ing and Installing
The Steering Angle Sensor - G85- is installed in the steering gear.
The Steering Angle Sensor - G85- cannot be replaced separately.
– Remove the steering. Refer to ⇒ Suspension, Wheels, Steer‐
ing; Rep. Gr. 48 ; Steering Gear; Steering Gear, Removing
and Installing .
4.7
ABS Sensor Ring, Checking
Special tools and workshop equipment required
♦ Gauge - Sender Wheel - T10473-
Procedure
• The wheel bearing unit is removed.
– Check the entire circumference of the ABS sensor ring -2- with
the Gauge - Sender Wheel - T10473- as shown.
1 - Wheel Bearing Unit
2 - Seal with integrated ABS Sensor Ring
ABS sensor ring test diagram.
A - ABS Sensor Ring is OK
B - ABS Sensor Ring is Faulty
5
Special Tools
Special tools and workshop
equipment required
♦ Torque Wrench 1331
5-50Nm - VAG1331-
♦ Open Ring Spanner Insert -
AF 11mm - VAG1410/6-
♦ Torque Wrench - Universal
Joint - VAG1410/7-
♦ Mini Torque Wrench -
VAS6854-
♦ Brake Pedal Actuator -
VAG1869/2- .
♦ Torque Wrench - Assembly
Tool - VAG1410/8-
♦ Gauge - Sender Wheel - T10473-
♦ Torque Wrench 1410 - VAG1410-
♦ Torque Screwdriver - VAG1624-
♦ ESD Work Surface - VAS6613-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст