Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 295
63 – Bumpers
1
Front Bumper
⇒ “1.1 Overview - Bumper Cover”, page 312
⇒ “1.2 Overview - Attachments”, page 313
⇒ “1.3 Overview - Impact Member”, page 316
⇒ “1.4 Overview - Guides”, page 317
⇒ “1.5 Bumper Cover, Removing and Installing”, page 317
⇒ “1.6 Bumper Cover, Servicing”, page 320
⇒ “1.7 Parking Aid Bracket, Installing”, page 320
⇒ “1.8 Parallel Parking Assist Bracket, Installing”, page 324
1.1
Overview - Bumper Cover
Note
Depending on model version, there are minor differences in the bumper cover.
1 - Bumper Cover
❑ PP/EPDM material
❑ Removing and instal‐
ling. Refer to
2 - Bolt
❑ 2 Nm
❑ Left and right
❑ Pointing upward
3 - Bolt
❑ Quantity: 5 on each side
❑ Attached to the wheel
housing liner
❑ Tightening specification
-item 4-
4 - Bolt
❑ 2 Nm
❑ Quantity: 3
❑ Attached to the lock car‐
rier
1.2
Overview - Attachments
⇒ “1.2.1 Overview - Attachments, except GTI”, page 313
⇒ “1.2.2 Overview - Attachments, GTI”, page 314
1.2.1
Overview - Attachments, except GTI
Note
Depending on the model version, slight deviations for attachments must be considered.
1 - Support
❑ For the headlamp wash‐
er system on the right
side
❑ Engaged in the front
bumper cover
❑ To be removed only with
front bumper cover re‐
moved
2 - Bumper Cover
❑ PP/EPDM material
❑ Removing and instal‐
ling. Refer to
.
3 - Support
❑ For the headlamp wash‐
er system on the left
side
❑ Engaged in the front
bumper cover
❑ To be removed only with
front bumper cover re‐
moved
4 - Fog Lamp Trim
❑ Left
❑ Pull forward out of the
retainer
❑ There are different ver‐
sions. Refer to the Parts
Catalog for the alloca‐
tion.
5 - Left Cover
❑ Pull forward out of the retainers in the bumper cover; it is not necessary to remove the bumper cover.
❑ There are different versions. Refer to the Parts Catalog for the allocation.
6 - Spoiler Bracket
❑ To be removed only with front bumper cover removed
7 - Center Air Grille
❑ There are different versions. Refer to the Parts Catalog for the allocation.
8 - License Plate Holder
❑ Not installed on all models and not in all markets.
❑ There are different versions. Refer to the Parts Catalog for the allocation.
9 - Clips
❑ Different quantity for attaching
10 - Right Cover
❑ Pull forward out of the retainers in the bumper cover; it is not necessary to remove the bumper cover.
❑ There are different versions. Refer to the Parts Catalog for the allocation.
11 - Fog Lamp Trim
❑ Right
❑ Pull forward out of the retainer
❑ There are different versions. Refer to the Parts Catalog for the allocation.
1.2.2
Overview - Attachments, GTI
Note
Depending on the model version, slight deviations for attachments must be considered.
1 - Support
❑ For the headlamp wash‐
er system on the right
side
❑ Engaged in bumper
cover
❑ To be removed only with
bumper cover removed
2 - Bumper Cover
❑ PP/EPDM material
❑ Removing and instal‐
ling. Refer to
3 - Support
❑ For the headlamp wash‐
er system on the left
side
❑ Engaged in bumper
cover
❑ To be removed only with
bumper cover removed
4 - Spoiler Bracket
❑ To be removed only with
bumper cover removed
5 - Front Spoiler
❑ Left
❑ To be removed only with
bumper cover removed
6 - Center Air Grille
❑ There are different ver‐
sions. Refer to the Parts Catalog for the allocation.
7 - Trim
❑ Left
❑ Pull forward out of the retainer
❑ There are different versions. Refer to the Parts Catalog for the allocation.
8 - Left Cover
❑ To be removed only with bumper cover removed
9 - License Plate Holder
❑ Not installed on all models and not in all markets.
❑ There are different versions. Refer to the Parts Catalog for the allocation.
10 - Clips
❑ Different quantity for attaching
11 - Trim
❑ Right
❑ Pull forward out of the retainer
❑ There are different versions. Refer to the Parts Catalog for the allocation.
12 - Right Cover
❑ To be removed only with bumper cover removed
13 - Frame
❑ For the sensor
14 - Front Spoiler
❑ Right
❑ To be removed only with bumper cover removed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст