Volkswagen Golf Variant, Jetta. Manual — part 10
– Please insert -screwdriver- from underneath whilst pushing
securing tab forwards.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
2. Selector mechanism
37
ble support bracket on gearbox. Do not secure with securing
clips yet. Do not clip in ball head.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
38
If the sheet metal is bent downwards, it may cause noises. The
cable will vibrate against the sheet metal.
– Observe sheet metal. Press it back up in the tunnel during
installation.
Loosen adjustment screw -arrow-.
– Put selector housing onto cable.
– Insert selector lever cable into selector mechanism.
– Insert cable into bearing and insert pin from above, down‐
wards through eye.
When you have checked freedom of movement of cable
⇒ page 43
, insert locking plate.
– Attach cable with new locking plate on cable support bracket
of selector mechanism.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
2. Selector mechanism
39
tem .
– Check cable
⇒ page 43
.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
40
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст