Volkswagen Passat / Passat Variant (2011 year). Manual — part 84
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
11.2
Removing
Note
Do not damage underlying panels when cutting out.
– Position parting cuts according to degree of damage and cut
out.
Passat 2011 ➤ , Passat Variant 2011 ➤
11. Renewing side panel - part section
333
– Separate original joint to sealing channel and to tail light
mounting.
Passat 2011 ➤ , Passat Variant 2011 ➤
334
surface back to bare metal.
– Clean any dust and grease off flange area on wheel arch.
11.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
Passat 2011 ➤ , Passat Variant 2011 ➤
11. Renewing side panel - part section
335
MIG solder seams or SG continuous weld seams are permitted at the parting cuts shown in the illustration.
11.3.1
Preparing new part
New part
♦ Side panel subpart
♦ Moulded foam element
♦ 2K body adhesive -D 180 KD3 A2-
♦ 2K polyurethane adhesive -D 180 KD2 A1- (for right side pan‐
el)
Passat 2011 ➤ , Passat Variant 2011 ➤
336
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст