Volkswagen Passat / Passat Variant (2011 year). Manual — part 12
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
4.2
Removing
– Separate original joint.
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing bumper bracket
45
4.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
4.3.1
Welding in
New part
♦ Front bumper bracket
– Adapt new part with vehicle positioned on alignment bracket
set and fix in place.
Passat 2011 ➤ , Passat Variant 2011 ➤
46
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing bumper bracket
47
5
Renewing upper wheel housing lon‐
gitudinal member
Comprises: upper outer longitudinal member and upper inner
longitudinal member
Note
♦
If the upper longitudinal member for wheel housing is re‐
newed, the repairs must be documented according to the
market-specific legislation.
♦
The vehicle identification number should be installed/em‐
bossed before the new part is welded in.
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
Passat 2011 ➤ , Passat Variant 2011 ➤
48
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст