Volkswagen Passat / Passat Variant (2011 year). Manual — part 13
member
2 - Front inner longitudinal
member
3 - Bonded area
4 - Aperture to plenum cham‐
ber
Cut out together with
.
5 - Parting cut for partial re‐
placement
A partial replacement can also
be made with the specified
parting cut.
Dimension -a- = 270 mm
5.1
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing upper wheel housing longitudinal member
49
Removing
– Separate original joint at upper outer longitudinal member
-1-.
Passat 2011 ➤ , Passat Variant 2011 ➤
50
-1-.
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing upper wheel housing longitudinal member
51
5.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
5.3.1
Preparing new part
New part
♦ Upper inner longitudinal member
♦ Upper outer longitudinal member
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
52
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст