Volkswagen Passat / Passat Variant (2011 year). Manual — part 55
-1 and 2- centrally at top and bottom -shaded areas- to B-pillar
reinforcement -3- using one small SG weld at each point. Re‐
move B-pillar reinforcement with side member reinforcements
again.
Passat 2011 ➤ , Passat Variant 2011 ➤
12. Renewing B-pillar reinforcement - part section
217
elongated holes, SG continuous seam.
Passat 2011 ➤ , Passat Variant 2011 ➤
218
Note
The holes -3- must align.
– Weld web plate to side member front reinforcement -1- and to
B-pillar reinforcement -4-, RP spot weld seam.
12.3.3
Moulded foam elements
Follow repair instructions.
Moulded foam elements ⇒ General Information; Body Repairs,
General Body Repairs ; General Notes; Moulded foam elements
Position of the moulded foam elements
Passat 2011 ➤ , Passat Variant 2011 ➤
12. Renewing B-pillar reinforcement - part section
219
Welding in
Note
New part must be welded in within 90 minutes or adhesion of ad‐
hesive will be impaired.
– Drill 8 mm ∅ holes in B-pillar reinforcement on vehicle for SG
plug weld seam.
Distance between holes:
Dimension -a- = 40 mm
– Renew moulded foam element -1-, if necessary.
– Apply 2K body adhesive -D 180 KD3 A2- in the areas indica‐
ted.
Passat 2011 ➤ , Passat Variant 2011 ➤
220
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст