Volkswagen Passat / Passat Variant (2011 year). Manual — part 72
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
4.2
Removing
– Separate original outer joint.
– Separate bonded areas -1- on sealing channel.
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing tail light mounting
285
Passat 2011 ➤ , Passat Variant 2011 ➤
286
surface back to bare metal.
4.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
4.3.1
Preparing new part
New part
♦ Tail light mounting
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing tail light mounting
287
the factory.
4.3.2
Welding in
Note
The new part must be welded in within 90 minutes, or adhesion
of adhesive will be impaired.
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
– Check fit with bolt-on parts.
Passat 2011 ➤ , Passat Variant 2011 ➤
288
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст