Volkswagen Passat / Passat Variant (2011 year). Manual — part 70
the factory.
2.3.2
Welding in
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
Passat 2011 ➤ , Passat Variant 2011 ➤
2. Renewing rear cross panel (Variant)
277
– Weld in rear cross panel, RP spot weld seam and SG plug
weld seam or MIG solder seam.
Passat 2011 ➤ , Passat Variant 2011 ➤
278
cross panel, SG plug weld seam and RP spot weld seam.
– Weld in lock carrier, SG staggered continuous weld seam or
MIG staggered continuous weld seam.
Note
Spare wheel well may only be installed after reinstating paintwork
finish.
– Install spare wheel well
.
Passat 2011 ➤ , Passat Variant 2011 ➤
2. Renewing rear cross panel (Variant)
279
3
Renewing lock carrier
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
3.1
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
280
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст