Volkswagen Passat / Passat Variant (2011 year). Manual — part 64
17.3.2
Welding in
– Adapt new part and fix in position.
Passat 2011 ➤ , Passat Variant 2011 ➤
17. Renewing seat middle cross member
253
– Apply 2K body adhesive -D 180 KD3 A2- to areas bonded in
the factory.
– Weld seat cross member to inner mounting for seat cross
member and to floor panel, SG plug weld seam.
– Install outer cross member for seat
Passat 2011 ➤ , Passat Variant 2011 ➤
254
18
Renewing inner mounting for seat
cross member
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
Note
If a thread in the inner mounting for the seat cross member is
damaged, the component must be replaced.
18.1
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
18. Renewing inner mounting for seat cross member
255
Removing
– Separate original joint to centre tunnel, to floor panel and to
middle seat cross member -1-.
Passat 2011 ➤ , Passat Variant 2011 ➤
256
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст