Volkswagen Passat / Passat Variant (2011 year). Manual — part 63
set and fix in place.
– Check fit with bolt-on parts.
– Weld in rear side member reinforcement, SG continuous weld
seam and RP spot weld seam.
– Install side member
.
Passat 2011 ➤ , Passat Variant 2011 ➤
16. Renewing rear side member reinforcement
249
17
Renewing seat middle cross member
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• Outer seat cross member mounting already removed
.
17.1
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
250
Removing
– Separate original joint to inner mounting for seat cross mem‐
ber and to floor panel.
– Separate bonded connection -1- to floor panel.
Passat 2011 ➤ , Passat Variant 2011 ➤
17. Renewing seat middle cross member
251
surface back to bare metal.
17.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
.
17.3.1
Preparing new part
New part
♦ Seat mounting
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
252
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст