Volkswagen Passat / Passat Variant (2011 year). Manual — part 7
Floor group - centre
Note
Dimension -a- is measured on floor at the left and right B-pillar.
a - 1,486 mm ± 2.0 mm
Passat 2011 ➤ , Passat Variant 2011 ➤
7. Body dimensions
25
Floor group - rear
a - 1,000 mm ± 2.0 mm
b - 1,085 mm ± 2.0 mm
c - 987 mm ± 2.0 mm
Passat 2011 ➤ , Passat Variant 2011 ➤
26
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Tools
27
Alignment bracket set
Note
Alignment tasks may only be performed using Volkswagen AG
approved alignment bracket sets or measurement and alignment
systems .
9.1
Overview
Special tools and workshop equipment required
♦ Alignment bracket set Passat 2011 -VAS6325/3-
♦ Basic alignment bracket set -V.A.G 1610/-
Set up of complete alignment bracket set for Passat 2011 -
VAS6325/3- .
Detailed information on setting up the alignment bracket set can
be found with the equipment.
Passat 2011 ➤ , Passat Variant 2011 ➤
28
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст