Volkswagen Passat / Passat Variant (2011 year). Manual — part 8
Portal gauge
Note
Alignment tasks may only be performed using Volkswagen AG
approved alignment bracket sets or measurement and alignment
systems .
10.1
Overview
Special tools and workshop equipment required
♦ Portal gauge -VAS 5007-
♦ Portal gauge supplementary set for Passat 2006 -VAS
5007/22-
♦ Alignment bracket set Passat 2011 -VAS6325/3-
♦ Basic alignment bracket set -V.A.G 1610/-
10.1.1
Front door aperture
Set up for portal gauge -VAS 5007- with portal gauge supplement
for Passat 2006 -VAS 5007/22- , front door aperture.
Passat 2011 ➤ , Passat Variant 2011 ➤
10. Portal gauge
29
for Passat 2006 -VAS 5007/22- set can be found with the equip‐
ment.
10.1.2
Rear door aperture
Set up for portal gauge -VAS 5007- with portal gauge supplement
for Passat 2006 -VAS 5007/22- , rear door aperture.
Detailed information on setting up the portal gauge supplement
for Passat 2006 -VAS 5007/22- set can be found with the equip‐
ment.
Passat 2011 ➤ , Passat Variant 2011 ➤
30
RO: 50 40 55 50
1
Renewing left console
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
1.1
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Passat 2011 ➤ , Passat Variant 2011 ➤
1. Renewing left console
31
Removing
– Separate original joint.
Passat 2011 ➤ , Passat Variant 2011 ➤
32
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст