Volkswagen Passat / Passat Variant (2011 year). Manual — part 48
tips.
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
– Check fit with bolt-on parts.
Passat 2011 ➤ , Passat Variant 2011 ➤
9. Renewing A-pillar
189
seam are permitted.
Note
Both weld symbols are shown in the figure.
– Weld in door aperture and windscreen aperture, RP spot weld
seam (inverter).
– Weld A-pillar to A-pillar reinforcement, SG plug weld seam.
Passat 2011 ➤ , Passat Variant 2011 ➤
190
– Weld in wing retainer, SG plug weld seam.
– Install upper longitudinal member for wheel housing
Passat 2011 ➤ , Passat Variant 2011 ➤
9. Renewing A-pillar
191
10
Renewing A-pillar reinforcement -
part section
WARNING
Observe safety notes!
Welding, parting using spark generating machines/tools or tin‐
ning in foam treated areas creates gases which are hazardous
to health and environment. Therefore, refrain from using these
processes.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• A-pillar part section already removed
1 - A-pillar reinforcement
2 - Hinge reinforcement
Is part of A-pillar reinforcing
and is removed as well.
3 - Bonded areas
4 - Side member reinforcement
5 - Moulded foam element
Note
6 - Cutting point
7 - A-pillar
Part section removed.
Passat 2011 ➤ , Passat Variant 2011 ➤
192
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст