Volkswagen Passat / Passat Variant (2011 year). Manual — part 49
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
10.2
Removing
Note
Do not damage underlying panels when cutting out.
– A-pillar -1- cut out according to dimension -a-.
Passat 2011 ➤ , Passat Variant 2011 ➤
10. Renewing A-pillar reinforcement - part section
193
out.
Dimension -b- = 140 mm
– Separate original joint of A-pillar reinforcement.
– Separate original joint for hinge reinforcing for inner A-pillar
-1-.
Passat 2011 ➤ , Passat Variant 2011 ➤
194
surface back to bare metal.
10.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
10.3.1
Preparing new part
New part
♦ A-pillar reinforcement
♦ Moulded foam element
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
10. Renewing A-pillar reinforcement - part section
195
-1-.
– Apply 2K body adhesive -D 180 KD3 A2- in the areas indica‐
ted.
10.3.2
Moulded foam elements
Follow repair instructions.
Moulded foam elements ⇒ General Information; Body Repairs,
General Body Repairs ; General Notes; Moulded foam elements
Position of the moulded foam elements
Passat 2011 ➤ , Passat Variant 2011 ➤
196
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст