Volkswagen Passat / Passat Variant (2011 year). Manual — part 25
well with bonding areas.
– 4 suction lifters -V.A.G 1344- are positioned on outer sides of
roof.
– Position roof on roof frame.
– Check roof fit with windscreen and rear window.
Passat 2011 ➤ , Passat Variant 2011 ➤
1. Renewing roof
97
Adjusting roof depth
Note
♦
The securing belts -1- prevent the roof lifting off the roof frame or shifting during the adhesion process.
♦
Securing belts must not be tightened too tightly in order to avoid damage.
♦
Dimension -a- can be set by tightening and loosening tensioning belts, adjusts position roof relative to side
parts/panels.
♦
Use setting gauge -3371- to check dimension -a-.
– In areas shown, tension securing belts -T10038- transversely
over roof to vary height of roof.
– Secure roof in front and rear window apertures using vice-grip
pliers.
– Check line of roof versus roof side members.
♦ Dimension -a- = 4.0 ± 0.5 mm
– If necessary for compensation purposes, place pieces of felt
-533 867 910 B- on roof frame.
Passat 2011 ➤ , Passat Variant 2011 ➤
98
Bonding roof
– Remove roof.
– Apply corrosion protection measures according to guidelines
in ⇒ Paint workshop manual: Corrosion and corrosion pro‐
tection, attached and welded parts, materials .
– Lightly sand down bonding areas on left and right roof side
members.
– Clean adhesive surfaces on roof and vehicle with silicone re‐
mover -LSE 020 100 A3- .
Note
♦
The adhesive must be applied very quickly.
♦
Always observe the application time (pot life).
♦
Use pneumatic or electric cartridge guns to apply adhesive.
– Cut approx. 2 mm off nozzle -B- to provide appropriate bead
geometry.
Note
For this repair, it is absolutely necessary to work with great care
to prevent faults during processing.
Passat 2011 ➤ , Passat Variant 2011 ➤
1. Renewing roof
99
member in area of the factory-fitted bonds using compressed
air gun -V.A.G 1761/1- .
Passat 2011 ➤ , Passat Variant 2011 ➤
100
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст