Volkswagen Passat / Passat Variant (2011 year). Manual — part 15
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
6.2
Removing
Partial renewal
Depending on damage, a partial renewal is possible using parting
cut -1-.
– Separate original joint to front longitudinal member cover plate
and to plenum chamber from wheel housing side.
Passat 2011 ➤ , Passat Variant 2011 ➤
6. Renewing front wheel housing
57
Passat 2011 ➤ , Passat Variant 2011 ➤
58
6.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
.
6.3.1
Preparing new parts
♦ Wheel housing
♦ Suspension strut mounting
♦ Suspension strut mounting reinforcement
Passat 2011 ➤ , Passat Variant 2011 ➤
6. Renewing front wheel housing
59
Note
♦
Drill a double row of holes in area -1-.
♦
Distance between holes: approx. 30 mm.
Passat 2011 ➤ , Passat Variant 2011 ➤
60
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст