Volkswagen Passat / Passat Variant (2011 year). Manual — part 68
1.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
1.3.1
Preparing new part
New part
♦ Lock carrier
♦ Cross panel
♦ Cross member for rear cross panel
♦ Left exhaust system retainer
♦ Right exhaust system retainer
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
1. Renewing rear cross panel
269
the factory.
1.3.2
Welding in
Note
New part must be welded in within 90 minutes or adhesion of ad‐
hesive will be impaired.
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
– Check fit with bolt-on parts.
Passat 2011 ➤ , Passat Variant 2011 ➤
270
weld seam or MIG solder seam.
Passat 2011 ➤ , Passat Variant 2011 ➤
1. Renewing rear cross panel
271
cross panel, SG plug weld seam and RP spot weld seam.
– Weld in lock carrier, RP spot weld seam and SG staggered
continuous weld seam or MIG staggered continuous weld
seam.
Note
Spare wheel well may only be installed after reinstating paintwork
finish.
Passat 2011 ➤ , Passat Variant 2011 ➤
272
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст