Volkswagen Passat / Passat Variant (2011 year). Manual — part 69
2
Renewing rear cross panel (Variant)
Includes: cross member for rear cross panel, left and right exhaust
system retainers and lock carrier
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• Spare wheel well already removed
.
1 - Cross panel
2 - Lock carrier
3 - Bonded area
4 - Right exhaust system re‐
tainer
5 - Cross member for rear
cross panel
6 - Left exhaust system retain‐
er
Passat 2011 ➤ , Passat Variant 2011 ➤
2. Renewing rear cross panel (Variant)
273
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
2.2
Removing
– Separate original outer joint.
– Separate bonded areas -2-.
Passat 2011 ➤ , Passat Variant 2011 ➤
274
It is advisable to additionally open a section of the original joint to left and right tail light mountings -1- and to
pull the tail light mounting outwards slightly, to ease the removal of the old rear cross panel and the installation
of the new rear cross panel.
– Separate inner original joint.
– Separate original joints of left and right exhaust system re‐
tainers -1 and 2-.
Passat 2011 ➤ , Passat Variant 2011 ➤
2. Renewing rear cross panel (Variant)
275
surface back to bare metal.
2.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
.
2.3.1
Preparing new part
New part
♦ Cross panel with lock carrier
♦ Cross member for rear cross panel
♦ Left exhaust system retainer
♦ Right exhaust system retainer
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
276
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст