Volkswagen Passat / Passat Variant (2011 year). Manual — part 95
be cut back to approx. 1 mm.
Note
For bonding reasons, the adhesive bead on the new part should
be cut back only just before it is to be fitted.
15.3.2
Bonding in
Note
For damaged paintwork or new body parts, apply corrosion pro‐
tection measures according to guidelines in ⇒ Paint workshop
manual: Corrosion and corrosion protection, attached and welded
parts, materials .
Prepare bonding surface on body for spare wheel well
-shaded area-.
Areas with new paint work structure:
– Clean respective areas with cleaning solution -D 009 401 04-
and then dry with a lint-free cloth.
– Then apply glass/paint primer -D 009 200 02- evenly using
primer applicator -D 009 500 25- .
♦ Drying time approx. 10 minutes
Areas with residual adhesive:
– If bonding is not performed immediately after cutting back, the
remaining residual material must be activated with activator -
D 181 801 A1- .
WARNING
Activator must not come into contact with the paintwork, oth‐
erwise paint surface will be damaged.
Passat 2011 ➤ , Passat Variant 2011 ➤
374
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст