Volkswagen Passat / Passat Variant (2011 year). Manual — part 34
member in area of the factory-fitted bonds using compressed
air gun -V.A.G 1761/1- .
Passat 2011 ➤ , Passat Variant 2011 ➤
3. Renewing roof (Variant)
133
190 MKD A3- -1- using pneumatic cartridge gun -
V.A.G 1761/1- .
♦ Dimension -a- = approx. 12 mm
♦ Dimension -b- = approx. 9 mm
Passat 2011 ➤ , Passat Variant 2011 ➤
134
of roof parallel to left and right roof flange with pneumatic car‐
tridge gun -V.A.G 1761/1- .
♦ Dimension -a- = approx. 4 mm
♦ Dimension -b- = approx. 9 mm
Note
♦
The application time (pot life) of the 2K body adhesive -D 180
KD3 A2- is approx. 90 min.
♦
Remove excessive 2K body adhesive -D 180 KD3 A2- from
bonding areas immediately. Once cured 2K body adhesive -D
180 KD3 A2- can only be removed using mechanical means.
♦
An assistant is required for the following work.
Passat 2011 ➤ , Passat Variant 2011 ➤
3. Renewing roof (Variant)
135
bead cross-section.
– Carefully operate double cartridge gun -VAS 5237- without
static mixer until adhesive is discharged uniformly from both
chambers of cartridge connector.
– Screw static mixer onto cartridge connector.
– Apply the first 100 mm of adhesive to a piece of cardboard and
only then begin to apply the adhesive to the vehicle.
– Fill area -1- with 2K body adhesive -D 180 KD3 A2- using
double cartridge gun -VAS 5237- .
Passat 2011 ➤ , Passat Variant 2011 ➤
136
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст