Volkswagen Passat / Passat Variant (2011 year). Manual — part 35
ture using vice-grip pliers and secure centre of roof using
– Check roof depth dimension and adjust if necessary.
– Remove excessive 2K body adhesive -D 180 KD3 A2- along
edge of roof immediately using a cloth soaked in silicone re‐
mover -LSE 020 100 A3- .
Note
♦
After bonding, vehicle must remain stationary on a level sur‐
face for 8-10 hours at room temperature (min. 15 °C) so that
adhesive can harden.
♦
No further work should be performed on the vehicle until the
„minimum curing time“ has expired.
Passat 2011 ➤ , Passat Variant 2011 ➤
3. Renewing roof (Variant)
137
Welding in
– Weld roof in windscreen aperture, RP spot weld seam.
– Weld roof in tailgate aperture, SG plug weld seam and MIG
solder seam.
Passat 2011 ➤ , Passat Variant 2011 ➤
138
roof and roof side member to fully seal bonded seam -1-.
– After painting, preserve roof cavities -arrow- with corrosion-
preventive wax -AKR 321 M15 4- .
Passat 2011 ➤ , Passat Variant 2011 ➤
3. Renewing roof (Variant)
139
4
Renewing roof - Variant with panora‐
ma sliding sunroof
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
1 - Roof
2 - Bonded areas (roof cross
member)
3 - Laser solder seam
4 - Reinforcing frame (panora‐
ma sliding sunroof)
5 - Bonded areas (reinforcing
frame)
Passat 2011 ➤ , Passat Variant 2011 ➤
140
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст