Volkswagen Passat / Passat Variant (2011 year). Manual — part 38

member and roof frame in area of the factory-fitted bonds us‐

ing pneumatic cartridge gun -V.A.G 1761/1- .

Passat 2011 ➤ , Passat Variant 2011 ➤

4. Renewing roof - Variant with panorama sliding sunroof

149

190 MKD A3- -1- using pneumatic cartridge gun -

V.A.G 1761/1- .

♦ Dimension -a- = approx. 12 mm
♦ Dimension -b- = approx. 9 mm

Passat 2011 ➤ , Passat Variant 2011 ➤

150

of roof parallel to left and right roof flange with pneumatic car‐

tridge gun -V.A.G 1761/1- .

♦ Dimension -a- = approx. 4 mm
♦ Dimension -b- = approx. 9 mm

Note

♦

The application time (pot life) of the 2K body adhesive -D 180

KD3 A2- is approx. 90 min.

♦

Remove excessive 2K body adhesive -D 180 KD3 A2- from

bonding areas immediately. Once cured 2K body adhesive -D

180 KD3 A2- can only be removed using mechanical means.

♦

An assistant is required for the following work.

Passat 2011 ➤ , Passat Variant 2011 ➤

4. Renewing roof - Variant with panorama sliding sunroof

151

bead cross-section.

– Carefully operate double cartridge gun -VAS 5237- without

static mixer until adhesive is discharged uniformly from both

chambers of cartridge connector.

– Screw static mixer onto cartridge connector.
– Apply the first 100 mm of adhesive to a piece of cardboard and

only then begin to apply the adhesive to the vehicle.

– Fill area -1- with 2K body adhesive -D 180 KD3 A2- using

double cartridge gun -VAS 5237- .

Passat 2011 ➤ , Passat Variant 2011 ➤

152